Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: 201311 SYS-MFT FX Clamping Systainer Set  (Read 926 times)

0 Members and 1 Guest are viewing this topic.

Offline Cincinnati

  • Posts: 8
201311 SYS-MFT FX Clamping Systainer Set
« on: April 18, 2017, 10:40 PM »
Is this set still available?  If not, is there a similar set or a replacement?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 813
  • I make sculptural furniture.
    • Flair Woodworks
Re: 201311 SYS-MFT FX Clamping Systainer Set
« Reply #1 on: April 18, 2017, 10:47 PM »
Try calling around to different dealers. We still have stock, but can't ship outside of Canada.
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline McNally Family

  • Posts: 400
  • Festool Atomic Phaser Particle Blaster (APPB Set)
Re: 201311 SYS-MFT FX Clamping Systainer Set
« Reply #2 on: April 18, 2017, 10:49 PM »
Is this set still available?  If not, is there a similar set or a replacement?

@Cincinnati

http://festoolownersgroup.com/classifieds/new-sys-mft-fx-set-201311/msg505959/#msg505959

In case this link does not work, look under classifieds:
NEW MFT FX Set 201311
Posted by: lucienlasocki
GREEN: In order of purchase = C18 5.2 Set w/Centrotec Installer's Set | CT26 w/Installer Cleaning Set | RS 2 E | Hose w/ Sleeve 3.5m | 115mm X 226mm Hand Sanding Block | 80mm X 133mm Hand Sanding Block | HSK D21.5 5m hose | CT Boom Arm Bundle Set |  Won the CXS Li 2.6 90 Limited Edition on 06/20/2016 | Metric Parallel Guide Set | 1080 Plate for custom MFT | OF 1400 EQ Router (metric) w/accessories | FS1400/2-LR 32 Guide Rail (x1) | MFT FX Set | Next  Purchase: Something else Metric |

RED: In order of purchase = Mafell P1cc w/tilting base | Complete range of Mafell blades | Collins Coping Foot |  F 160 (x1)+F 110 (x1)+F 80 (x1) w/Guide pocket, clamps & Connector (x1)  | Angle fence F-WA | Next Purchase :  TBD

Offline T. Ernsberger

  • Posts: 760
Re: 201311 SYS-MFT FX Clamping Systainer Set
« Reply #3 on: April 19, 2017, 06:00 AM »
I would call local dealers.  You should be able to find one.  I found three of them the other day at a local dealer. 

Offline T. Ernsberger

  • Posts: 760
Re: 201311 SYS-MFT FX Clamping Systainer Set
« Reply #4 on: April 19, 2017, 09:09 AM »
Here's a tip, if you go into your local Woodcraft and they don't have it.  They can do a store search,  it will list all stores that have it in stock.  Your Woodcraft can transfer it in or that Woodcraft can send it to you.  This is true with any product Woodcraft carries.  Even thought the stores can be independently owned they share the same computer.  That way you can get one for $300.

Offline yetihunter

  • Posts: 292
Re: 201311 SYS-MFT FX Clamping Systainer Set
« Reply #5 on: April 19, 2017, 10:37 AM »
Is this set still available?  If not, is there a similar set or a replacement?

The MFT clamping kit is half Lee Valley products...

http://www.leevalley.com/us/wood/Page.aspx?p=70681&cat=1,43837,43838,70865,70681

Parsed out:

http://www.leevalley.com/us/wood/page.aspx?p=70865&cat=1,43838

There are also the Parf Dogs:
http://www.leevalley.com/us/wood/page.aspx?p=71185&cat=1,41637

And the bench blade: 
http://www.leevalley.com/us/wood/page.aspx?p=64685&cat=1,41637

That said, the Festool branded kit is a better assortment.   Inline clamps and t-track clamps (screw or ratcheting)
are essential.   
« Last Edit: April 19, 2017, 10:59 AM by yetihunter »

Offline Svar

  • Posts: 798
Re: 201311 SYS-MFT FX Clamping Systainer Set
« Reply #6 on: April 19, 2017, 12:13 PM »
You can buy everything in that set (minus the systainer insert) from Festool and Lee Valley for ~$350.