Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Amp Rating on Festool Dust Extractor Outlet  (Read 3060 times)

0 Members and 1 Guest are viewing this topic.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7575
  • Finger Lakes Region, NY State , USA
Amp Rating on Festool Dust Extractor Outlet
« on: September 08, 2015, 07:41 PM »
Below is from Festool USA regarding the amp draw of tools plugged into the CT Dust Extractor outlets.
------------------------------------------------------------------------------------------------------------------------------------------

   
Thank you for your interest in Festool and Festool CT Dust Extractors.  You may have found that the integrated receptacle that provides energy for tool-triggered activation on the CT has a warning label on its dust cover.  This warning reads, “To reduce the risk of fire, only connect a tool rated 3.1 amp. maximum to this receptacle”.  What does this mean in regards to the tools you can use with a Festool CT Dust Extractor?  It means that CT Dust Extractors are designed to work with ALL Festool power tools.  However, we cannot speak for, or verify the compatibility of other non-Festool products used in conjunction with the Festool CT Dust Extractors.  Furthermore, you may find that it is advantageous to use another circuit to energize a power tool separate of that being used by the CT Dust Extractor to ensure that the maximum current* is available for the application.

*The quality of your energy supply (voltage & current) may vary.

Festool CT Dust Extractors are designed to be used with every Festool product in normal working environments.  In short, you will be fine to use any of our tools  with the CT.  We do it all the time without issue.  Remember that although it is capable of pulling 10 amps of current, it won't approach that level of draw in most applications. 

Brent



Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.