Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Ets ec 150/3 one part away from 5mm  (Read 1365 times)

0 Members and 1 Guest are viewing this topic.

Offline T. Ernsberger

  • Posts: 851
Ets ec 150/3 one part away from 5mm
« on: January 12, 2016, 10:59 PM »
I just bought a ets ec 150/3,  when I was looking through the manual I looked at the tool parts break down and it appears that only one part that differs from the 5mm and the 3mm. So my question is if I buy the 5mm part does that mean I can swap it out with my 3mm part and make my sander a 5mm if I wanted to swap between the two?  It would be really easy to do.  I noticed when I removed the pad that the part says 150/3 on it and saw pictures online of the 5mm and the same part says 150/5.  Looks like only two screws hold the parts in question on.  Part numbers are 500396 and 500333.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline bigdogmn73

  • Posts: 2
Re: Ets ec 150/3 one part away from 5mm
« Reply #1 on: November 15, 2016, 05:04 AM »
The part # you have listed is a $121 part...if that's worth it?

Offline TylerC

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 1021
Re: Ets ec 150/3 one part away from 5mm
« Reply #2 on: November 15, 2016, 08:22 AM »
This is the kind of tool modification that we can't really comment on one way or the other. Some other Foggers might have some feedback, but we can't recommend modifying tools in this capacity.