erock
 Offline
Location: cleveland, ohio Member Since: Apr 2010
Posts: 589
Waiting for a new Centrotec installers set.
|
 |
« on: January 15, 2011, 10:10 PM » |
|
Hello, I was wondering if anyone knew of any Festool sings or banners available. I would like to hang a couple in my shop to give it some charm  Thanks for any help. Eric |
|
|
|
|
Logged
|
Kapex, Domino, HL 850, OF1400, MFK700, TS 55, PS 300, CXS, C15, MFT 800, MFT1080, MFT/3, CT 26, CT midi, DX93E, DX93 , DTS 400, RO 125, ETS 125, LR32 set, parallel guide, FS 3000/2, (2) FS 1400/2, FS 800/2, Syslite, tape measure, multi toolie, utility knife, safety glasses, stein, folding rule, head lamp, XL fleece, XL sweater,(2) XL t-shirt, XL long sleeve shirt, XL training shirt, XL polo shirt, beanie, hat, FOG cap, banner, anti fatigue floor mat. I got a blog, check it out! http://dustfreewoodworking.blogspot.com/ |
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
Shane Holland
Festool USA Employee FOG Administrator
 Online
Location: USA Member Since: Jan 2007
Posts: 5118
|
|
« Reply #1 on: January 15, 2011, 10:13 PM » |
|
Eric,
We don't sell banners or signs. You may be able to ask your Festool dealer if they may have some old signage that they're willing to "donate" to you. I took several of our stock photographs and had them printed at 16" x 20" and framed them in my home office. Yes, I'm a die hard Festool guy.
Shane
|
|
|
|
|
Logged
|
|
|
|
erock
Offline
Location: cleveland, ohio Member Since: Apr 2010
Posts: 589
Waiting for a new Centrotec installers set.
|
|
« Reply #2 on: January 15, 2011, 10:21 PM » |
|
Thanks Shane, funny thing is I was thinking about printing some pics of some web sites and I was going to see if my buddy could blow them up and print them for me. He owns a print shop. And making some picture frames would give me a reason to use my festools!
|
|
|
|
|
Logged
|
Kapex, Domino, HL 850, OF1400, MFK700, TS 55, PS 300, CXS, C15, MFT 800, MFT1080, MFT/3, CT 26, CT midi, DX93E, DX93 , DTS 400, RO 125, ETS 125, LR32 set, parallel guide, FS 3000/2, (2) FS 1400/2, FS 800/2, Syslite, tape measure, multi toolie, utility knife, safety glasses, stein, folding rule, head lamp, XL fleece, XL sweater,(2) XL t-shirt, XL long sleeve shirt, XL training shirt, XL polo shirt, beanie, hat, FOG cap, banner, anti fatigue floor mat. I got a blog, check it out! http://dustfreewoodworking.blogspot.com/ |
|
|
Kevin D.
Offline
Location: Greater Toronto Area Member Since: Nov 2009
Posts: 615
|
|
« Reply #3 on: January 15, 2011, 11:01 PM » |
|
If you feel that way, get a Festool mat if they are still available for purchase. I have one at the entrance of my garage/shop from the house, and is perfect for wiping off the shoes of sawdust transitioning from each room. They look snazzy and vacuum nicely as well. Wish I had a second one. Think they are about $40. Ask your dealer if he can order one.
|
|
|
|
Logged
|
TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus, MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Hat, Festool T-Shirt (2), Festool Floor Mat, Festool Stein.
Wish List: Kapex, and more sanders.
|
|
|
erock
Offline
Location: cleveland, ohio Member Since: Apr 2010
Posts: 589
Waiting for a new Centrotec installers set.
|
|
« Reply #4 on: January 15, 2011, 11:29 PM » |
|
Cool thanks Kevin! I will have to send Bob a message to see if he could get one for me. It seems like some of the local dealers in my area don't know how to turn on some Festool tools  so I'm not going to bother them for any help with my search for signs or banners. |
|
|
|
|
Logged
|
Kapex, Domino, HL 850, OF1400, MFK700, TS 55, PS 300, CXS, C15, MFT 800, MFT1080, MFT/3, CT 26, CT midi, DX93E, DX93 , DTS 400, RO 125, ETS 125, LR32 set, parallel guide, FS 3000/2, (2) FS 1400/2, FS 800/2, Syslite, tape measure, multi toolie, utility knife, safety glasses, stein, folding rule, head lamp, XL fleece, XL sweater,(2) XL t-shirt, XL long sleeve shirt, XL training shirt, XL polo shirt, beanie, hat, FOG cap, banner, anti fatigue floor mat. I got a blog, check it out! http://dustfreewoodworking.blogspot.com/ |
|
|
Dovetail65
Offline
Location: UNITED STATES (US) Member Since: Feb 2008
Posts: 3864
|
|
« Reply #5 on: January 15, 2011, 11:43 PM » |
|
I have some Festool banners. I might sell them. One is I think 72" x 24-32" and another is smaller maybe 18" x 36". I wouldn't let the bigger one go for less than 125.00 though.  I'll dig them out if you are interested and post a picture. |
|
|
|
|
Logged
|
The one who says it can't be done should avoid interrupting the person doing it.
|
|
|
erock
Offline
Location: cleveland, ohio Member Since: Apr 2010
Posts: 589
Waiting for a new Centrotec installers set.
|
|
« Reply #6 on: January 15, 2011, 11:48 PM » |
|
I have some Festool banners. I might sell them. One is I think 72" x 24-32" and another is smaller maybe 18" x 36". I wouldn't let the bigger one go for less than 125.00 though. I'll dig them out if you are interested and post a picture. Hi Dovetail, I would like to know how much you would sell the 18"x36" and see a pic of it. Not sure the logical half would be happy if I spent $125 on a banner  . Thanks, Eric |
|
|
|
|
Logged
|
Kapex, Domino, HL 850, OF1400, MFK700, TS 55, PS 300, CXS, C15, MFT 800, MFT1080, MFT/3, CT 26, CT midi, DX93E, DX93 , DTS 400, RO 125, ETS 125, LR32 set, parallel guide, FS 3000/2, (2) FS 1400/2, FS 800/2, Syslite, tape measure, multi toolie, utility knife, safety glasses, stein, folding rule, head lamp, XL fleece, XL sweater,(2) XL t-shirt, XL long sleeve shirt, XL training shirt, XL polo shirt, beanie, hat, FOG cap, banner, anti fatigue floor mat. I got a blog, check it out! http://dustfreewoodworking.blogspot.com/ |
|
|
RobWoodCutter
Offline
Location: Yorktown, VA Member Since: May 2010
Posts: 38
|
|
« Reply #7 on: January 16, 2011, 01:13 AM » |
|
I like the banners too around the shop. Can't really find any, even on Ebay. So I download the TIF and printed them on my "E-size sheet plotter. I have also printed out several others, (Delta-PorterCable, Milwaukee, Ryobi, Lie-Neilsen, DeWalt, Bessey, Kreg,). I did get a couple of the Powermatic metal signs they were given away a while back with certain purchases. With the plotter, I can get up to about 36"x48" or so.
You might be able to get a local printer to print one out for you, but they might have copyright issues with printing it for you unless you can get permission from someone here.
Rob
|
|
|
|
|
Logged
|
|
|
|
Dovetail65
Offline
Location: UNITED STATES (US) Member Since: Feb 2008
Posts: 3864
|
|
« Reply #8 on: January 16, 2011, 01:56 AM » |
|
Well the big one is a bit sentimental, you can probably get the same quality made for maybe 75.00+. Depending on a few options etc.
Let me pull out the little one and check its condition etc, the big one is new in the box, the little one I can not even remember where I got it. I'll try to get a picture by Monday for you.
If I remember correctly it is the Festool blue with Festool word in green and maybe a pic of a tool. The large one is the White with Festool green lettering. The small one is actually a real Festool banner from possibly a store display and maybe 8 years old or so. The larger one is not a Festool endorsed banner that I know of for sure, but the font looks correct, etc.
|
|
|
|
|
Logged
|
The one who says it can't be done should avoid interrupting the person doing it.
|
|
|
BobKovacs
Offline
Location: UNITED STATES (US) Member Since: Nov 2007
Posts: 296
|
|
« Reply #9 on: January 16, 2011, 08:42 AM » |
|
Shane- you guys ought to come up with some stickers that can be put on vans, etc. Something to promote the brand, while allowing the contractors to show that they use only quality equipment. Kinda like the York, Trane, etc?, stickers on HVAC service vans.
|
|
|
|
|
Logged
|
|
|
|
erock
Offline
Location: cleveland, ohio Member Since: Apr 2010
Posts: 589
Waiting for a new Centrotec installers set.
|
|
« Reply #10 on: January 16, 2011, 08:47 AM » |
|
Shane- you guys ought to come up with some stickers that can be put on vans, etc. Something to promote the brand, while allowing the contractors to show that they use only quality equipment. Kinda like the York, Trane, etc?, stickers on HVAC service vans.
Bob, I have seen Festool decals on ebay. I think it's a package of 4. Just to a search on ebay, you should find them. Eric just checked ebay, someone is selling a 4 pack of 12" festool vinyl car window decals for $18.99 with free shipping. do a search of festool and sort by lowest+shipping.  |
|
|
|
« Last Edit: January 16, 2011, 08:51 AM by erock »
|
Logged
|
Kapex, Domino, HL 850, OF1400, MFK700, TS 55, PS 300, CXS, C15, MFT 800, MFT1080, MFT/3, CT 26, CT midi, DX93E, DX93 , DTS 400, RO 125, ETS 125, LR32 set, parallel guide, FS 3000/2, (2) FS 1400/2, FS 800/2, Syslite, tape measure, multi toolie, utility knife, safety glasses, stein, folding rule, head lamp, XL fleece, XL sweater,(2) XL t-shirt, XL long sleeve shirt, XL training shirt, XL polo shirt, beanie, hat, FOG cap, banner, anti fatigue floor mat. I got a blog, check it out! http://dustfreewoodworking.blogspot.com/ |
|
|
Jonhilgen
Offline
Location: Charleston, SC (USA) Member Since: Dec 2009
Posts: 874
|
|
« Reply #11 on: January 16, 2011, 09:25 AM » |
|
Shane- you guys ought to come up with some stickers that can be put on vans, etc. Something to promote the brand, while allowing the contractors to show that they use only quality equipment. Kinda like the York, Trane, etc?, stickers on HVAC service vans.
And let the thieves know that you have the best tools to take? No way. Jon |
|
|
|
|
Logged
|
The more Festools I buy, the more money I earn. The more money I earn, the more Festools I buy. The more...
TS 55, TS 75, Domino, CT22, OF 2000, C12, CXS, RAS, Trion, Fogtainers!
|
|
|
William Herrold
Offline
Location: Sweden Member Since: Jan 2008
Posts: 448
"failure is imminent"
|
|
« Reply #12 on: January 16, 2011, 09:32 AM » |
|
Even with an alarm connected to all the doors on my utility shell, I wouldn't want the thieves knowing where the expensive tools are located. My old truck was picked clean in 2000, I think I'll pass on putting stickers on my new one.
|
|
|
|
|
Logged
|
"I don't believe anything, but I have a lot of suspicions"
R.A.W.
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6526
|
|
« Reply #13 on: January 16, 2011, 10:11 AM » |
|
Shane- you guys ought to come up with some stickers that can be put on vans, etc. Something to promote the brand, while allowing the contractors to show that they use only quality equipment. Kinda like the York, Trane, etc?, stickers on HVAC service vans.
Bob, I have seen Festool decals on ebay. I think it's a package of 4. Just to a search on ebay, you should find them. Eric just checked ebay, someone is selling a 4 pack of 12" festool vinyl car window decals for $18.99 with free shipping. do a search of festool and sort by lowest+shipping. Please be advised that these decals on ebay are reproductions. They are made to order in a variety of colors! If you look further on ebay you can also find counterfeit t-shirts and watches. Festool is protective of their copyrighted, trademarked, and patented material - as well they should be. Although imitation is flattering to a point - in these instances it is still illegal. I personally would urge you not to support companies that steal and benefit from theft. Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
Shane Holland
Festool USA Employee FOG Administrator
Online
Location: USA Member Since: Jan 2007
Posts: 5118
|
|
« Reply #14 on: January 16, 2011, 12:25 PM » |
|
Like Peter said, we have not given those sellers on eBay our permission to use our trademark. So, please don't buy from these sellers and I would appreciate an email if you see them so we can have them removed from eBay.
As for decals, that's already in the works. There's a good chance that we'll be including a Festool decal in all tool systainers, at least for a limited time starting soon. They will be on a clear backing so you can stick them to a window.
|
|
|
|
|
Logged
|
|
|
|
RobWoodCutter
Offline
Location: Yorktown, VA Member Since: May 2010
Posts: 38
|
|
« Reply #15 on: January 16, 2011, 12:54 PM » |
|
Shane,
I not sure the level of demand for the banners, but clearly there are a few that would like one (or two). Most likely not enough demand to make it worthwhile to turn it into a direct saleable item.
I would be amazed if Festool actually manufactured thier own banners. They most likely buy them from a Banner making company. If they are printed in Germany and sent out, they would cost more obviously, but if they are printed in here in the US for handing out to Festool dealers and for trade shows, it would be a simple matter of providing a link to the banner printer company and allow them to sale the banners directly to those of us that are willing to burn money on them.
Just my $02.
Thanks, Rob
|
|
|
|
|
Logged
|
|
|
|
Peter Halle
Global Moderator
Offline
Location: Powhatan, Virginia USA Member Since: Jul 2007
Posts: 6526
|
|
« Reply #16 on: January 16, 2011, 01:00 PM » |
|
Like Peter said, we have not given those sellers on eBay our permission to use our trademark. So, please don't buy from these sellers and I would appreciate an email if you see them so we can have them removed from eBay.
As for decals, that's already in the works. There's a good chance that we'll be including a Festool decal in all tool systainers, at least for a limited time starting soon. They will be on a clear backing so you can stick them to a window.
Just to let you know, I have sent links to Shane about watches, tshirts, and decals from ebay. I only mention this so that he doesn't get buried in duplicate messages / emails. Peter |
|
|
|
|
Logged
|
The tools in my truck were talking the other day. The Dewalts, PC's, Boschs, Makitas were not happy. They also were in the minority. Their complaint: They felt unused and unappreciated since the Festools moved in. I guess the truth hurts.
|
|
|
WarnerConstCo.
Offline
Location: Auburn, In usa Member Since: Apr 2008
Posts: 3123
|
|
« Reply #17 on: January 16, 2011, 01:38 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
Shane Holland
Festool USA Employee FOG Administrator
Online
Location: USA Member Since: Jan 2007
Posts: 5118
|
|
« Reply #18 on: January 16, 2011, 01:44 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
jonny round boy
Offline
Location: West Yorkshire, UK Member Since: Jul 2007
Posts: 2134
|
|
« Reply #19 on: January 16, 2011, 02:16 PM » |
|
|
|
|
|
|
Logged
|
Festoolian since February 2006
TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - T12 drill - PS420 jigsaw - OFK500 trimmer
Wish list (in no particular order!): Anything not listed above....
|
|
|
MarkusS
Offline
Location: Germany - Lake of Constance Member Since: Feb 2007
Posts: 59
|
|
« Reply #20 on: January 16, 2011, 02:18 PM » |
|
Thanks Shane, funny thing is I was thinking about printing some pics of some web sites and I was going to see if my buddy could blow them up and print them for me. He owns a print shop. And making some picture frames would give me a reason to use my festools!
You can check the wallpaper-area on the german festool website http://www.festool.de/Service/Downloads/Seiten/download-wallpaper.aspx - there are some nice pictures in quite high resolution. |
|
|
|
|
Logged
|
|
|
|
Corwin
Online
Location: Washington State, USA Member Since: Jan 2007
Posts: 2027
|
|
« Reply #21 on: January 16, 2011, 03:40 PM » |
|
So, you're the guy that sold my wife that Fess Tool shirt she gave me for Christmas. Shame on you.  |
|
|
|
« Last Edit: January 16, 2011, 03:44 PM by Corwin »
|
Logged
|
Shirt Size: L
|
|
|
Sparktrician
Offline
Location: Northern Virginia (That's in the USA, Pilgrim!) Member Since: Dec 2009
Posts: 1242
|
|
« Reply #22 on: January 16, 2011, 04:14 PM » |
|
OUCH!!! |
|
|
|
|
Logged
|
- Willy -
MFT/3 x2, TS 55, Guide Rails x5, Parallel Guide Set, CT 22 w/Boom Arm, CT Mini, RO 90, RO 125, ETS 125, RTS 400, RAS 115.04, C 12 + Centrotec Imperial Bits, CSX Set, TI 15, DF 500 Domino Set, SCG-10, Domino Plate from RonWen, MFK 700 Set, CMS-GE, OF 1010, OF 1400, OF 2200 Set, LR 32 System, MFS System, Syslite, Systainers, Sortainers, clamps.
Coming attractions: Carvex, Kapex, more "Stuff"-tainers...
|
|
|
Brice Burrell
Offline
Location: Pittsburgh, PA, USA Member Since: Mar 2007
Posts: 6247
Remodeling Contractor
|
|
« Reply #23 on: January 16, 2011, 04:39 PM » |
|
Wow, that's really low Shane......oh, wait, you were referring to Darcy, never mind.  |
|
|
|
|
Logged
|
|
|
|
WarnerConstCo.
Offline
Location: Auburn, In usa Member Since: Apr 2008
Posts: 3123
|
|
« Reply #24 on: January 16, 2011, 05:30 PM » |
|
So, you're the guy that sold my wife that Fess Tool shirt she gave me for Christmas. Shame on you. Yeah, I was trying to find the picture, that would have made it even better!!! |
|
|
|
|
Logged
|
|
|
|
Corwin
Online
Location: Washington State, USA Member Since: Jan 2007
Posts: 2027
|
|
« Reply #25 on: January 16, 2011, 06:10 PM » |
|
You mean this one?  It just happens that I'm wearing this particular shirt as I sit here typing this. |
|
|
|
« Last Edit: January 16, 2011, 06:12 PM by Corwin »
|
Logged
|
Shirt Size: L
|
|
|
WarnerConstCo.
Offline
Location: Auburn, In usa Member Since: Apr 2008
Posts: 3123
|
|
« Reply #26 on: January 16, 2011, 08:05 PM » |
|
You mean this one? [ ERROR: SPECIFIED ATTACHMENT MISSING ] It just happens that I'm wearing this particular shirt as I sit here typing this. That's it. Ok guys, we can get these one's out in any color combo you want. Be a pioneer and order your own Fess Tool custom embroidered shirt or decals!! I am sorry Corwin, that is just too darn funny.  |
|
|
|
|
Logged
|
|
|
|
Ken Nagrod
Restricted
Offline
Location: New Jersey Member Since: Jul 2010
Posts: 3438
|
|
« Reply #27 on: January 16, 2011, 08:09 PM » |
|
Darcy,
Will you also be selling Duwalt items?
|
|
|
|
|
Logged
|
|
|
|
PeterK
Offline
Location: Wet muggy humid South Member Since: Jan 2007
Posts: 822
|
|
« Reply #28 on: January 16, 2011, 08:29 PM » |
|
Think that is Duhwalt!
|
|
|
|
|
Logged
|
|
|
|
Corwin
Online
Location: Washington State, USA Member Since: Jan 2007
Posts: 2027
|
|
« Reply #29 on: January 16, 2011, 08:59 PM » |
|
I don't know what's up. She's been calling me Fess all day.
|
|
|
|
|
Logged
|
Shirt Size: L
|
|
|
|
