Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Planex Abrasive Grit Question  (Read 295 times)

0 Members and 1 Guest are viewing this topic.

Offline c_dwyer

  • Posts: 146
Planex Abrasive Grit Question
« on: January 24, 2019, 09:06 PM »
Hi All:
Recently picked up a planex when they were on sale for some upcoming drywall work, nothing major or full-time. Do any of you drywallers have advice on what grit size(s) to stick with for basic USG joint compound? I'm seeing the full run of grits from 40 to 320, but wondering if just one or two grit sizes would be all that I need. What are folks using out there?

Thank you in advance,
C.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline mrgeigh

  • Posts: 10
Re: Planex Abrasive Grit Question
« Reply #1 on: January 24, 2019, 11:10 PM »
I use 220 grit most of the time. This will feather the edges and take off any stray compound. I also use 220 after a skim coat. If your taping is not that great try 180 or 150 then top coat and finish with 220

Offline tjbnwi

  • Posts: 5878
  • Cedar Tucky Indiana
Re: Planex Abrasive Grit Question
« Reply #2 on: January 24, 2019, 11:50 PM »
220, be careful not to burn the paper. It removes compound very quickly, move at a quick pace.

Tom