Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?  (Read 735 times)

0 Members and 1 Guest are viewing this topic.

Offline DT-PNW

  • Posts: 1
Anyone have a solution to this jumping by the Rotex? It’s like it’s out of balance? Wants to jump and bounce when in contact with the wood surface

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online Mario Turcot

  • Posts: 299
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #1 on: May 15, 2018, 03:26 PM »
Welcome to the FOG!

Does it jump on both modes? I recommand if you haven`t watch it yet.
Mario

Offline Birdhunter

  • Posts: 2109
  • Woodworker, Sportsman, Retired
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #2 on: May 15, 2018, 03:36 PM »
I have the RO125 and it’s a tricky beast to master. Others have recommended turning the vac to mid range and that does seem to calm the beast down. I find keeping the pad flat and not applying downward pressure helps a bunch. I find a mid range speed also helps.
Birdhunter

Offline Alex

  • Posts: 5635
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #3 on: May 15, 2018, 04:07 PM »
Anyone have a solution to this jumping by the Rotex? It’s like it’s out of balance? Wants to jump and bounce when in contact with the wood surface

The Rotex is always out of balance, that's the nature of this type of sander. The shape gives it away.

You'll have to learn how to control the sander, get a good grip with both hands, one in the fron and one in the back, and guide the sander where you want it.

Offline RobBob

  • Posts: 1249
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #4 on: May 15, 2018, 04:09 PM »
This will help:
Front Handle

Offline rvieceli

  • Posts: 771
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #5 on: May 15, 2018, 04:13 PM »
Unlike the random orbit sanders, the Rotex sanders really require you to pay attention to technique the whole time you are using them. You'll tend to get that bucking if you are lifting an edge of the pad or sometimes if the sanded surface is not flat yet.

The problem with watching someone that knows what they are doing in almost any avenue is that they make it look too easy.  [big grin]

If you pay close attention to the video, he widens his stance a bit and pulls his elbows in some to give better control. His left hand on the side of the front keeps the sander in control. If you notice he tends to move his whole upper body when steering the sander not just moving it around by extending his arms.

The biggest thing is just practicing on some scrap pieces and keeping the pad flat on the surface.

Ron

Offline rst

  • Posts: 1800
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #6 on: May 15, 2018, 05:22 PM »
All the Rotexs are beasts and require a learning curve, best not to start out on your mahogany Chippendale replica.

Offline zapdafish

  • Posts: 465
Re: Rotex RO 150 FEQ-Plus, wants to hop around, balance issue?
« Reply #7 on: May 16, 2018, 07:51 AM »
Make sure vacuum is on low
CT22, TS55, Kapex, RO150, Domino, RS 2 E