Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: slight bend in 106" saw guide  (Read 903 times)

0 Members and 1 Guest are viewing this topic.

Offline riles

  • Posts: 3
slight bend in 106" saw guide
« on: April 01, 2017, 12:43 PM »
Hi!!  I've got a 106" saw guide that seems to have developed a bow. its about 10 years old and along with other guides I own has been a real hero in my shop!  when I place a known straight edge across the raised guide track I get a slight "rock" in the straight edge,which brings about a heavy 1/16" bow in an 8' plywood rip.   My question is a) is this a common occurrence in older guides and b) any suggestions on how to fix this?! ( without buying a new guide!)  thanks for any help or input!( tried calling Festool a couple of times ,left voice mails   with no callbacks)
« Last Edit: April 03, 2017, 10:17 AM by riles »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online ear3

  • Posts: 3179
Re: slight bend in 106" saw guide
« Reply #1 on: April 05, 2017, 09:03 PM »
Any word on this @TylerC ?
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline TylerC

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 907
Re: slight bend in 106" saw guide
« Reply #2 on: April 06, 2017, 09:02 AM »
This is not a very common occurrence. Sometimes users will inadvertently push a bow into the rail, but it shouldn't happen on its own. To verify that it's an actual bow, place it flat against a sheet of plywood. Draw a line on the grooved side of the guide rail. Then flip it around and see if it lines up.

Unfortunately, if there is a bow, there's no real way to "unbow" it.

Offline tjbnwi

  • Posts: 4986
  • Cedar Tucky Indiana
Re: slight bend in 106" saw guide
« Reply #3 on: April 06, 2017, 09:07 AM »
Make sure the plywood is well supported, any dip will cause a "bow".

Tom