Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Torque PDC18/4  (Read 973 times)

0 Members and 1 Guest are viewing this topic.

Offline charley1968

  • Posts: 488
Torque PDC18/4
« on: July 09, 2016, 07:03 AM »
Hi Festool, Tyler, Phil
I wonder if there's some kind of list that gives the torque in N/m or torque cut-of ,for given settings on the screwdriver f.e: 1. Gear, 8th cut-off position: 40N/m. Thanks in advance: A.
« Last Edit: July 09, 2016, 07:33 AM by charley1968 »
Just for today..

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ear3

  • Posts: 3349
Re: Torque PDC18/4
« Reply #1 on: July 09, 2016, 07:06 AM »
That's a great question -- I look forward to the response as well from @TylerC or some other rep.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline Phil Beckley

  • Festool Employee
  • *
  • Posts: 1412
  • Ask the question, and get the discussion going...
    • youtube - Festool U.K
Re: Torque PDC18/4
« Reply #2 on: July 09, 2016, 07:58 AM »
Hi Festool, Tyler, Phil
I wonder if there's some kind of list that gives the torque in N/m or torque cut-of ,for given settings on the screwdriver f.e: 1. Gear, 8th cut-off position: 40N/m. Thanks in advance: A.

Hi
 This figures below are taken from the user guide - the figure I use for training session is 60Nm in 1st gear and 400 rpm. Perfect for the 300-400 mm fixings.........then put the fixing in - easy  [smile]
Motor voltage 18 V
Idling speed* 1st gear 0 - 400 rpm
2nd gear 0 - 850 rpm
3rd gear 0 - 1850 rpm
4th gear 0 - 3800 rpm
Torque for easy/tough fastening
applications
40/60 Nm
Adjustable torque** 1st gear 0,75 - 12 Nm
2nd gear 0,6 - 7,5 Nm
3rd gear 0,55 - 5 Nm
4th gear 0,5 - 2,7 Nm
Chuck clamping range 1,5 - 13 mm
Drill diameter max. Wood 50 mm
Metal 1
Festool U.K Employee | Festool UK Website


Offline charley1968

  • Posts: 488
Re: Torque PDC18/4
« Reply #3 on: July 09, 2016, 08:14 AM »
Ta,Phil, that helps a lot! Do you happen to know if the transmission of force is linear or is it a differential? Do you understand what i mean? Thanks!
Just for today..