Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: TS 75 Panther blade "stuck"  (Read 857 times)

0 Members and 1 Guest are viewing this topic.

Offline TXFIVEO

  • Posts: 87
TS 75 Panther blade "stuck"
« on: February 26, 2017, 03:36 PM »
Okay, had a client who needed me to trim the bottom of a barn door about 3/4". Upon completing the cut I hit a nail and the TS75 blade got stuck in the housing.  Would not plunge down.  After some checking I see that the arbor on the blade got loose.  I tightened it up and gave it a go.  Finished the cut but didn't "feel" right.  Thoughts?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tjbnwi

  • Posts: 5310
  • Cedar Tucky Indiana
Re: TS 75 Panther blade "stuck"
« Reply #1 on: February 26, 2017, 03:40 PM »
Pull the blade, see if it bent a tooth to the plate bent.

I'd also pull the cover to see if anything is stuck in the housing.

Tom

Offline TylerC

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 1003
Re: TS 75 Panther blade "stuck"
« Reply #2 on: February 27, 2017, 10:01 AM »
It sounds like you may have bent the blade. I'd replace it with something else and see if it feels better.