Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Vac hose question  (Read 705 times)

0 Members and 1 Guest are viewing this topic.

Offline Laminator

  • Posts: 330
Vac hose question
« on: February 27, 2019, 11:03 PM »
Does festool make the new flexible vac hose that is 27mm at both ends like the old style? (Non tapered)

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8420
    • Festool USA
Re: Vac hose question
« Reply #1 on: February 28, 2019, 09:35 AM »
No, all of the new smooth hoses are tapered.

(Tyler)

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8750
  • Finger Lakes Region, NY State , USA
Re: Vac hose question
« Reply #2 on: March 07, 2019, 10:23 AM »
The new smooth hose for the CT-SYS is a straight 27 ..... not tapered.


This one https://www.festoolusa.com/accessory/201665---d-27x3,0m-as-90%C2%B0ct unless it has been changed again. But I don't think so  because the tapered would be hard to fit into the CT-SYS.

Note is is a half meter shorter than the standard hoses that come with the CTs. And it has the 90 degree elbow instead of the straight connector on the vac end. But it could still be connected with the 90 or swapped for a straight connector. Depending on if you want it for a Mini / Midi or 26 / 36 / 48.

Seth

 
« Last Edit: March 08, 2019, 12:28 AM by SRSemenza »

Offline Laminator

  • Posts: 330
Re: Vac hose question
« Reply #3 on: March 08, 2019, 08:33 AM »
Thanks a million Seth!  I just bought a 36mm x 7m hose and love it, no way to go back to the old ones.  I use a 3' whip to connect various tools and was wanting to make new whips out of the smooth hose, so I bought one ( I thought) and its the 32\27.  It is a keeper for in the shop and now I will order the one you referenced.

Thanks!