Author Topic: [UK] Suppliers of Veneered Doors?  (Read 4810 times)

0 Members and 1 Guest are viewing this topic.

Offline WelshWood

  • Posts: 191
  • www.facebook.com/WelshWoodworks/
    • Welsh Woodworks
[UK] Suppliers of Veneered Doors?
« on: January 02, 2016, 02:07 PM »
Hi guys,

Been looking for some doors for an upcoming renovation for a client, 10 oak veneered doors need to be fitted.

However, after looking through some local merchants they only do a few sizes, but not the sizes that I need.. [crying]

Anyone able to point me in the right direction to a supplier in the UK which can help?

Many thanks,

~WW
TS 55 REBQ-Plus | CXS Li 2,6-Set | CTL Midi Cleantec | BHC 18 Li 5,2-Plus | Carvex PS 420 EBQ-Set | OF 1400 EBQ-Plus | DRC 18/4 Li 5,2-Plus | Domino DF 500 Q-Plus Set | ROTEX RO 125 FEQ-PLUS | Kapex 120 UG-Set, Base Frame & L/R Extensions

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jimbouk

  • Posts: 344
Re: [UK] Suppliers of Veneered Doors?
« Reply #1 on: January 02, 2016, 02:10 PM »
Where are you based? (Just incase the name doesn't relate) and what veneer are you after.
BHC 18, TSC 55REB, OF 1400, MIDI, TS55, TRION, Df500, CSX...

Offline WelshWood

  • Posts: 191
  • www.facebook.com/WelshWoodworks/
    • Welsh Woodworks
Re: [UK] Suppliers of Veneered Doors?
« Reply #2 on: January 02, 2016, 02:17 PM »
Scotland  [wink]

South West Wales jimbouk!

Looking for a standard oak veneer, 825mm, 726mm, 686mm, 626mm & 610mm

Annoying thing is that many of these sizes are stocked, but very rarely I find 1 style of door in the 5 sizes!

~WW
TS 55 REBQ-Plus | CXS Li 2,6-Set | CTL Midi Cleantec | BHC 18 Li 5,2-Plus | Carvex PS 420 EBQ-Set | OF 1400 EBQ-Plus | DRC 18/4 Li 5,2-Plus | Domino DF 500 Q-Plus Set | ROTEX RO 125 FEQ-PLUS | Kapex 120 UG-Set, Base Frame & L/R Extensions

Offline speed

  • Posts: 302
Re: [UK] Suppliers of Veneered Doors?
« Reply #3 on: January 02, 2016, 04:50 PM »
take a look at xl joinery, lpd doors, and pjs then  find a local stockist or online

i use a mix of xl joinery and lpd that i can get from my local timberyard
has made the change. now 100%  T-loc :)

Offline WelshWood

  • Posts: 191
  • www.facebook.com/WelshWoodworks/
    • Welsh Woodworks
Re: [UK] Suppliers of Veneered Doors?
« Reply #4 on: January 03, 2016, 01:15 PM »
take a look at xl joinery, lpd doors, and pjs then  find a local stockist or online

i use a mix of xl joinery and lpd that i can get from my local timberyard

Cheers for those @speed , shame they still don't do them in the sizes I require, gonna have to think about putting in either a new lining or pack the other one out!

Looking for 1 uPVC door too, any recommendations for that?

Many thanks,

~WW
TS 55 REBQ-Plus | CXS Li 2,6-Set | CTL Midi Cleantec | BHC 18 Li 5,2-Plus | Carvex PS 420 EBQ-Set | OF 1400 EBQ-Plus | DRC 18/4 Li 5,2-Plus | Domino DF 500 Q-Plus Set | ROTEX RO 125 FEQ-PLUS | Kapex 120 UG-Set, Base Frame & L/R Extensions

Offline jimbouk

  • Posts: 344
Re: [UK] Suppliers of Veneered Doors?
« Reply #5 on: January 03, 2016, 01:46 PM »
I normally buy blanks cut them to size and lip them and send them to a custom veneer shop. Works out a bit more cost wise but produces the best finish. Not sure of any out your way but I can set you up with people in London via pm if you need.
BHC 18, TSC 55REB, OF 1400, MIDI, TS55, TRION, Df500, CSX...

Offline WelshWood

  • Posts: 191
  • www.facebook.com/WelshWoodworks/
    • Welsh Woodworks
Re: [UK] Suppliers of Veneered Doors?
« Reply #6 on: January 03, 2016, 03:29 PM »
I normally buy blanks cut them to size and lip them and send them to a custom veneer shop. Works out a bit more cost wise but produces the best finish. Not sure of any out your way but I can set you up with people in London via pm if you need.

@jimbouk - that's the way I would prefer but the client doesn't want to be spending that kind of money..

I've found 2 websites so far, both have the perfect style door that the client has asked for, yet both sites have poor reviews!

http://www.building-supplies-online.co.uk/

&

https://www.leaderdoors.co.uk/

Anyone had any experience with them?

~WW
TS 55 REBQ-Plus | CXS Li 2,6-Set | CTL Midi Cleantec | BHC 18 Li 5,2-Plus | Carvex PS 420 EBQ-Set | OF 1400 EBQ-Plus | DRC 18/4 Li 5,2-Plus | Domino DF 500 Q-Plus Set | ROTEX RO 125 FEQ-PLUS | Kapex 120 UG-Set, Base Frame & L/R Extensions

Offline speed

  • Posts: 302
Re: [UK] Suppliers of Veneered Doors?
« Reply #7 on: January 03, 2016, 03:45 PM »
what size and style do you need?

if you can get it at leader doors you will be able to get them from
http://www.doorsgalore.co.uk

ive used them before but its close enough for them to deliver to me from store, i dont know what they are like for couriering them

looking at leader doors they mainly sell xl joinery, lpd doors and deanta doors, as does doors galore

has made the change. now 100%  T-loc :)

Offline WelshWood

  • Posts: 191
  • www.facebook.com/WelshWoodworks/
    • Welsh Woodworks
Re: [UK] Suppliers of Veneered Doors?
« Reply #8 on: January 03, 2016, 03:50 PM »
what size and style do you need?

if you can get it at leader doors you will be able to get them from
http://www.doorsgalore.co.uk

ive used them before but its close enough for them to deliver to me from store, i dont know what they are like for couriering them

looking at leader doors they mainly sell xl joinery, lpd doors and deanta doors, as does doors galore

@speed

That clears things up..

I thought xl joinery, lpd doors and deanta doors were suppliers.. not the makers!  [embarassed]

Checked them out on lpddoors.co.uk and they have a supplier 15 miles from me, will email them and hopefully get a reply in the morning!

I for one always check review sites before buying from any other shop online, but even if 99% are good reviews, that 1% will stick at the back of my mind..  [bite tongue]

~WW

TS 55 REBQ-Plus | CXS Li 2,6-Set | CTL Midi Cleantec | BHC 18 Li 5,2-Plus | Carvex PS 420 EBQ-Set | OF 1400 EBQ-Plus | DRC 18/4 Li 5,2-Plus | Domino DF 500 Q-Plus Set | ROTEX RO 125 FEQ-PLUS | Kapex 120 UG-Set, Base Frame & L/R Extensions

Offline SMJoinery

  • Posts: 530
Re: [UK] Suppliers of Veneered Doors?
« Reply #9 on: January 03, 2016, 04:00 PM »
Just a quick heads up before parting with any monies, Leader Shapland which I assume is the parent company went into liquidation on 18 Dec 2015. Not sure how or if it will affect the subsidiaries but "forewarned is forearmed".

We have a local company here who distribute nationally they have the biggest door showroom and stockholding of doors I've ever seen!!....Finewood Doors in Falkirk.
If you contact them remember to tell them it's a trade enquiry. The will sell to the public but they get a different rate.

Offline Deansocial

  • Posts: 2114
Re: [UK] Suppliers of Veneered Doors?
« Reply #10 on: January 03, 2016, 04:01 PM »
Xl do the sizes in the style you want. Phone them and they will tell you the closest supplier

Offline Deansocial

  • Posts: 2114
Re: [UK] Suppliers of Veneered Doors?
« Reply #11 on: January 03, 2016, 04:03 PM »
Xl do the sizes in the style you want. Phone them and they will tell you the closest supplier

Leaderflush hasn't been sold on like other parts of the company either