Woodworking & Power Tools Forum - Festool Owners Group > GENERAL DISCUSSIONS > Building Materials > Appleply?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Appleply?  (Read 2758 times)
0 Members and 1 Guest are viewing this topic.
woodie

Offline Offline

Location: Cedar Rapids, Iowa
Member Since: Nov 2011
Posts: 187
« on: January 06, 2012, 05:07 PM »
I'm planning on building a freestanding cabinet with drawers and lots of exposed plywood banding. Initially I had hoped to use Baltic Birch, however no one seems to be able to get anything above BB/BB in 4'x8'. I plan to finish by spraying with a clear satin finish, so BB/BB is out of the question. Now I'm trying to learn more about Appleply.

A Hardwood Supply company near me stocks Appleply in a C-2 grade. By near me, I mean a 2 hour drive each way.  They'll deliver product to me, I'm just hesitant to order without seeing it.  They assure me the face veneer is good for the type of finish I'm considering. Does anyone know if this correct?
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

WoodChuckWoods

Offline Offline

Location: Anchorage, Alaska, USA
Member Since: Dec 2010
Posts: 119
« Reply #1 on: January 07, 2012, 04:12 AM »
i have made 1 cabinet with appleply but the reason i got it was to leave the edges exposed since they are so uniform and easy to sand, not sure if this helps. you could google image the exact product to see a comparable?
Logged
Thanx
          Charles S.
woodie

Offline Offline

Location: Cedar Rapids, Iowa
Member Since: Nov 2011
Posts: 187
« Reply #2 on: January 07, 2012, 06:18 PM »
That's the exact reason I'm interested in using it (high ply count and consistent edge). At $110 for a 3/4" sheet, I'm hoping the face veneer is nice enough too?
Logged
Sparktrician

Offline Offline

Location: Northern Virginia (That's in the USA, Pilgrim!)
Member Since: Dec 2009
Posts: 1242
« Reply #3 on: January 07, 2012, 07:37 PM »
You can call State Industries for more info on species and grades - 1.800.626.1981. 

 Smile
Logged
- Willy -

MFT/3 x2, TS 55, Guide Rails x5, Parallel Guide Set, CT 22 w/Boom Arm, CT Mini, RO 90, RO 125, ETS 125, RTS 400, RAS 115.04, C 12 + Centrotec Imperial Bits, CSX Set, TI 15, DF 500 Domino Set, SCG-10, Domino Plate from RonWen, MFK 700 Set, CMS-GE, OF 1010, OF 1400, OF 2200 Set, LR 32 System, MFS System, Syslite, Systainers, Sortainers, clamps.

Coming attractions: Carvex, Kapex, more "Stuff"-tainers...
woodie

Offline Offline

Location: Cedar Rapids, Iowa
Member Since: Nov 2011
Posts: 187
« Reply #4 on: January 07, 2012, 07:47 PM »
Thanks, I tried that already. I got transferred and had to leave a voicemail. I haven't heard back yet so I thought I'd solicit members here. I'll give them another call Monday.

Logged
Rick Christopherson
Retailer

Online Online

Location: Central U.S.
Member Since: Jan 2007
Posts: 769



WWW
« Reply #5 on: January 08, 2012, 01:17 AM »
I use Applyply almost exclusively, versus BB. The grade and material are a world of difference. Even the B face is pretty good. The core also machines and routes better than BB too. I normally use it for drawer material and other assemblies, but there is no reason you could not use it for finished carcase construction too.
Logged
      www.dominoguide.com
mike1967

Offline Offline

Location: UNITED STATES (US)
Member Since: Nov 2007
Posts: 38
« Reply #6 on: January 08, 2012, 06:24 AM »
I have used Europly for cabinets.  I am not sure of the difference between Appleply and Europly, but the prices look similar.  Europly is costly stuff, but I like the exposed edge look.
Logged
Brice Burrell

Online Online

Location: Pittsburgh, PA, USA
Member Since: Mar 2007
Posts: 6247


Remodeling Contractor


WWW
« Reply #7 on: January 08, 2012, 12:38 PM »
I can't see why you'd be happy with C-2 apply ply if you feel BB/BB birch is out of the question.
Logged
Check out my new blog, The Green and Dark Blue Blog.
woodie

Offline Offline

Location: Cedar Rapids, Iowa
Member Since: Nov 2011
Posts: 187
« Reply #8 on: January 12, 2012, 03:30 PM »
I tried tracking down someone that carried Columbia Forest's Europly to no avail.  I was finally able to get in touch with someone at State Industries, and they were really helpful.  I decided to just bite the bullet and ordered the Appleply on Monday. Took delivery today, and it looks pretty good  Smile.

Brice, the only reason BB grade Baltic wouldn't work is the "footballs". With a clear finish, those would look nasty. If I had more time, I'd experiment with veneering to Baltic.  There's always next time...
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: