Author Topic: Cabinet Door Hinges  (Read 1223 times)

0 Members and 1 Guest are viewing this topic.

Offline DIY WoodWerx

  • Posts: 49
Cabinet Door Hinges
« on: June 11, 2017, 08:49 PM »
I'm new to building cabinets.  Is there a cabinet hinge that allows for full overlay coverage (cover the entire face frame)  and can be used with a 1 1/2" face frame?  This is for two end cabinets.
Festool TS 55 REQ-F-PLUS
Festool OF 1400 EQ-F-PLUS
Festool CT MIDI HEPA
Festool Domino DF 500 Q-PLUS
Festool PRO 5 LTD (ETS 125 REQ)
Festool FS 1400/2 (x2)

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline kevinculle

  • Posts: 122
Re: Cabinet Door Hinges
« Reply #1 on: June 12, 2017, 06:44 AM »
Yes...the Blum Compact 33 hinges for face frame cabinets have a wide range of mounting plates to meet specific overlay details including yours. 

Offline tjbnwi

  • Posts: 5048
  • Cedar Tucky Indiana
Re: Cabinet Door Hinges
« Reply #2 on: June 12, 2017, 08:59 AM »
As Kevin mentioned the 33 with the proper plate, they also make the 38C which will work also.

Tom

Offline DIY WoodWerx

  • Posts: 49
Re: Cabinet Door Hinges
« Reply #3 on: June 12, 2017, 09:37 AM »
As Kevin mentioned the 33 with the proper plate, they also make the 38C which will work also.

Tom

Sorry for the newbie question, but when searching for the Blum hinge and plate, I should search for a 33 or 38C hinge and a 1 1/2" overlay plate?
Festool TS 55 REQ-F-PLUS
Festool OF 1400 EQ-F-PLUS
Festool CT MIDI HEPA
Festool Domino DF 500 Q-PLUS
Festool PRO 5 LTD (ETS 125 REQ)
Festool FS 1400/2 (x2)

Offline tjbnwi

  • Posts: 5048
  • Cedar Tucky Indiana
Re: Cabinet Door Hinges
« Reply #4 on: June 12, 2017, 09:52 AM »
As Kevin mentioned the 33 with the proper plate, they also make the 38C which will work also.

Tom

Sorry for the newbie question, but when searching for the Blum hinge and plate, I should search for a 33 or 38C hinge and a 1 1/2" overlay plate?

Download the brochure from this link;

http://www.blum.com/us/en/01/20/10/?campaign=2KnoHE

Start at page 82. You can use the 39C, 38C, 39B or 33 to achieve what your trying to do.

Door thickness, edge detail and swing degrees are what you need to figure out. Once you get these details figured out you can begin picking hinges.

Your head will most likely explode by the time you get this all figured out.

Tom

Offline Cheese

  • Posts: 3253
Re: Cabinet Door Hinges
« Reply #5 on: June 12, 2017, 10:42 AM »
FWIW...I've used lots of the Blum 33 style hinges and in the past AH Turf was always the cheapest and more importantly they had everything in stock for immediate shipment. I tried using local suppliers but they were always short of everything I needed.  [crying]

http://ahturf.com/store/index.php?route=product/category&path=21232_269_679