« previous next »
Pages: [1]   Go Down

Author Topic: Constructive adhesive tape?  (Read 4162 times)

0 Members and 1 Guest are viewing this topic.

Offline mcooley

  • Posts: 209
Constructive adhesive tape?
« on: March 20, 2018, 01:45 PM »
I have seen in the building industry they now use Ultra High Bond double-sided constructive tape for actually joining metal parts in place of fasteners or even welds. I also see here that Titebond sells a flooring tape adhesive.

http://www.titebond.com/product.aspx?id=b519b393-14ca-4806-8c01-b9c754291c0e

I wonder what prevents 3M or others like Titebond from not creating a permanent high bond double-sided tape for joining pieces in place of liquid glue for general wood working? Any thoughts?
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Rob-GB

  • Posts: 1078
Re: Constructive adhesive tape?
« Reply #1 on: March 20, 2018, 02:53 PM »
Apart from cost it would probably be the need for the adhesive carrier (tape) to be as strong or stronger than the glue and yet be just microns thick.
For such a product to be a commercially viable alternative to modern adhesives it would need to bring a lot to the table.
Ease of use.
Ease of clean up.
Minimal glue lines.
Strength.
Water resistance/proof.
Durability.
To name a few, a flooring contractor I know reckons flooring tape will only last a few years in situ if you are lucky.

Rob.
Logged
Problem? No such thing! Only a solution waiting to be found:- RJ

"A $2 guppy swims......" Deke

Offline DoubleL

  • Posts: 44
Re: Constructive adhesive tape?
« Reply #2 on: March 20, 2018, 03:04 PM »
You might check out fastcap speedtape:

https://www.fastcap.com/product/speedtape

I think that's what you're looking for.
Larry
Logged

Offline rst

  • Posts: 1949
Re: Constructive adhesive tape?
« Reply #3 on: March 20, 2018, 06:52 PM »
3M makes all kinds of ultra high bond adhesive tapes for industry.  I bought mine on Amazon.
Logged

Offline bnaboatbuilder

  • Posts: 130
Re: Constructive adhesive tape?
« Reply #4 on: March 20, 2018, 07:24 PM »
Tesa is another high bond adhesive family of tapes
Logged
- John

Offline Michael Kellough

  • Posts: 3471
Re: Constructive adhesive tape?
« Reply #5 on: March 20, 2018, 08:13 PM »
You need a smooth non-absorbent substrate like metal to use a thin membrane adhesive. 3M does make acrylic adhesive tapes for permanent bonding of metal.

You might be able to use the same adhesive on smooth well-fitted maple.

For construction lumber you need thick gap filling stuff like what comes from a caulking tube, or that thick gooey Fastcap  Speedtape.

The Fastcap gooey stuff never seems harden (and it’s messy) so it is not a substitute for anything Except rubber cement IMO.
« Last Edit: March 20, 2018, 08:16 PM by Michael Kellough »
Logged
Pages: [1]   Go Up
« previous next »