Author Topic: Folding Door Hardware  (Read 1182 times)

0 Members and 1 Guest are viewing this topic.

Offline mkurtis

  • Posts: 4
Folding Door Hardware
« on: May 01, 2017, 08:28 PM »
I'm working on a cabinet for my grandfather. Approximately 5ft wide, 2.5ft high and he really wants bi-fold doors on it. I'm struggling to locate suitable hardware for it. So far all I've found is the Hettich Wing Line 26. It doesn't appear to be commonly available to purchase online. Does anyone have hardware recommendations for folding doors?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Tim Raleigh

  • Posts: 3473
    • Oakville Cabinetry
Re: Folding Door Hardware
« Reply #1 on: May 01, 2017, 10:35 PM »
Does anyone have hardware recommendations for folding doors?

Depends on how much you want to pay. Lets assume as little as possible. The cable system flipper door slide is a good solution. Recommended by @Jon Hilgenberg
The Hawa folding concepta are more expensive but have more support with a top rail.
Tim

Online tjbnwi

  • Posts: 5271
  • Cedar Tucky Indiana
Re: Folding Door Hardware
« Reply #2 on: May 01, 2017, 11:39 PM »

Offline Don T

  • Posts: 1703
  • Phoenix, Az
Re: Folding Door Hardware
« Reply #3 on: May 02, 2017, 12:31 AM »
I built a cabinet with the Blum.  I don't remember which one I purchased anymore but here is a link to Rockler's website.
Rocler Blum Hinges
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS