Author Topic: Matching Laminates and Edge Banding  (Read 3138 times)

0 Members and 1 Guest are viewing this topic.

Offline bholmsten

  • Posts: 29
Matching Laminates and Edge Banding
« on: March 20, 2018, 01:20 PM »
Where is a good place to order edge banding and laminate especially if you are trying to match a previous color etc.
Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline lwoirhaye

  • Posts: 142
Re: Matching Laminates and Edge Banding
« Reply #1 on: March 20, 2018, 09:36 PM »
Laminate suppliers will probably send you sample cards on request.  If you're near a big enough city there will be a commercial plywood dealer who should have a rack of these cards in the office.

Offline Sparktrician

  • Posts: 3555
Re: Matching Laminates and Edge Banding
« Reply #2 on: March 21, 2018, 08:45 AM »
Most laminate distributors have chip chains that you can buy.  I's been very helpful to me to be able to grab one or two and help customers find the one that catches their eye best. 
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline lwoirhaye

  • Posts: 142
Re: Matching Laminates and Edge Banding
« Reply #3 on: April 16, 2018, 01:26 PM »
You can get a lot of matches in .018" pvc banding.  Find out what the maker and name of the laminate is, then google can be used easily to find out if there is a banding made to match it.

You can try exploring the websites of Wurth Louis and Co.  and similar suppliers that serve the industry.  There are different ones that vary by region.  Calling around to different commercial plywood dealers in your area, if there are any, you can ask what ranges of matching laminates and edgebanding they carry.
« Last Edit: April 16, 2018, 01:33 PM by lwoirhaye »