Author Topic: Mesquite  (Read 1432 times)

0 Members and 1 Guest are viewing this topic.

Offline Birdhunter

  • Posts: 2533
  • Woodworker, Sportsman, Retired
Mesquite
« on: January 21, 2019, 01:19 PM »
Several years ago, I was turning large natural edge bowls out of burl mesquite I bought from a guy in West Texas. The wood came in blocks about 18" on a side with one side being bark.

I tried the phone number I had for the guy and it's not a working number.

I neighbor wants me to make her a bowl from burl mesquite.

Anyone know where I can find large burl mesquite blanks?
 
Birdhunter

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline deepcreek

  • Posts: 801
    • TimberFire Studio
Re: Mesquite
« Reply #1 on: January 21, 2019, 03:11 PM »
Talk with Brandon or Sydney at Berdoll Sawmill.  Tell them Joe & Erich (TimberFire Studio) referred you.  They're the best!

www.BerdollSawmill.com
4754 FM 535
Cedar Creek, Texas 78612
Phone: (512) 629-3625
Fax: (512) 727-9514
Email: info@berdollsawmill.com
Hours: Monday-Friday 8:00 a.m.-5:00 p.m.
Saturday 9:00 a.m.-1:00 p.m.
Joe Adams
TimberFire Studio
Houston, Texas

http://www.facebook.com/timberfire

Offline Birdhunter

  • Posts: 2533
  • Woodworker, Sportsman, Retired
Re: Mesquite
« Reply #2 on: January 21, 2019, 06:26 PM »
Thanks
Birdhunter

Offline Don T

  • Posts: 1881
  • Phoenix, Az
Re: Mesquite
« Reply #3 on: January 21, 2019, 08:35 PM »
You can try.
Chequers Millworks
9044 W. Deer Valley Rd.
Peoria, Az. 85382
(623) 337-6556
Owners name is Todd Langford. Look him up on Facebook he shows some of his live edge wood. Call him for specifics.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set