Author Topic: Recommend a good lumber supplier in/near Limerick, Collegeville, Pottstown PA  (Read 2061 times)

0 Members and 1 Guest are viewing this topic.

Offline bigred00

  • Posts: 30
Looking to try my hand at furniture with some simple side tables so looking for good lumber and maybe some pre-finished ply. Anywhere i can go in SW Montco? The local box stores don't have anything remotely suitable.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jimbo51

  • Posts: 398
Stop by Woodcraft in Downingtown or New Castle Delaware. Woodcraft in Allentown has a different owner.

Pick up a copy of Fine Woodworking and look at the lumber ads in the back. There are some places in PA that advertise there.

The Woodworking Show in Timonium Maryland in January will also have wood dealers.

Offline Tinker

  • Posts: 3548
Google: The Woodfinder
Tinker
Wayne H. Tinker

Offline Lou in DE

  • Posts: 89
Although probably a 1 hour drive for you Hearne Hardwood near Oxford PA would be worth the trip - they have just about anything you could want. They have a website with prices etc.

Lou

In theory, theory and reality are the same. In reality, theory and reality are different - especially in woodworking!

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1684
Industrial Plywood in Reading has prefinished ply and FAS lumber.

http://www.industrialplywood.com/

Also stocks some Festools...

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline JBag09

  • Posts: 173
I have used Industrial Plywood a few times. Great prices, and great products. Also will deliver free with $300 order, and as we all know that's only a few sheets of plywood [emoji849] Double check on that for your area.
Hearne does have pretty much anything you want, and great people there as well.


Sent from my iPhone using Tapatalk

Offline John Broomall

  • Posts: 45
Fessenden Hall would be the distributor for plywood. For hardwood try Spacht Sawmill in Worcester Township (near Skippack), he carries a lot of local species and has been featured in Fine Woodworking. There are a number of other small operations around that you can usually find through Craigslist.

Offline BJM9818

  • Posts: 146
It's about a hour away but Quinn in Yardley has a bunch of stuff. Just an old guy with a tractor and a bunch of shipping containers.  215-493-6252

Offline Bob D.

  • Posts: 663
Try Weaver's Woodworking
933 Martin Church Rd.
New Holland, PA 17557
717-445-4336

https://www.google.com/maps/dir/''/weaver+woodworking+new+holland+pa/@40.17718,-76.1442038,12z/data=!3m1!4b1!4m8!4m7!1m0!1m5!1m1!1s0x89c66b4609701631:0xfca31ee567487b03!2m2!1d-76.0741639!2d40.1772011

I have bought pre-finished ply and other material from them.
Their prices beat anything local (Southern NJ) and made it worth
the trip when buying in bulk.
-----
It's a table saw, do you know where your fingers are?

Offline Richard/RMW

  • Retailer
  • *
  • Posts: 1684
It's about a hour away but Quinn in Yardley has a bunch of stuff. Just an old guy with a tractor and a bunch of shipping containers.  215-493-6252

Geeze, Mike's still there? Before we moved we lived in Yardley, he was my go-to guy. Milled and kiln dried a lot of his own stock.

Getting off track a bit but there's a guy near Hammonton who mills urban recovered trees, probably falls within an hour of Montco. More of a slab kinda place.

RMW

As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline JBag09

  • Posts: 173
Try Weaver's Woodworking
933 Martin Church Rd.
New Holland, PA 17557
717-445-4336

https://www.google.com/maps/dir/''/weaver+woodworking+new+holland+pa/@40.17718,-76.1442038,12z/data=!3m1!4b1!4m8!4m7!1m0!1m5!1m1!1s0x89c66b4609701631:0xfca31ee567487b03!2m2!1d-76.0741639!2d40.1772011

I have bought pre-finished ply and other material from them.
Their prices beat anything local (Southern NJ) and made it worth
the trip when buying in bulk.


Bob,
I will certainly be checking them out when we go out that way. We always go to the campground right down the street and I never knew the place was there, until now.


Sent from my iPhone using Tapatalk

Offline Tinker

  • Posts: 3548
It's about a hour away but Quinn in Yardley has a bunch of stuff. Just an old guy with a tractor and a bunch of shipping containers.  215-493-6252

Geeze, Mike's still there? Before we moved we lived in Yardley, he was my go-to guy. Milled and kiln dried a lot of his own stock.

Getting off track a bit but there's a guy near Hammonton who mills urban recovered trees, probably falls within an hour of Montco. More of a slab kinda place.

RMW


It's about a hour away but Quinn in Yardley has a bunch of stuff. Just an old guy with a tractor and a bunch of shipping containers.  215-493-6252

That sounds like just the place i wood go to.  A few years ago, i was thinking of getting a band mill and sawing my own logs.  A little clear thinking and I decided that all that work might be a wate of time.  i had already been 39 for about a hundred years, give or take , and i decided there was not enuf incentive to cram a bunch of logs into my already over extended schedule. So i searched thru Woodfinder.com and found a guy with a band mill about 40 miles away.  He was a one man operation.  It took me a little more than an hour each way, but it took nearly a day to make the round trip.  We spent more than a couple of hours swapping stories.  I decided then and there that it was a whole lot more fun incorperating "historic" tales with hauling lumber than busting my tail rolling logs around.
Tinker

Wayne H. Tinker

Offline Rhino1789

  • Posts: 28
It's about a hour away but Quinn in Yardley has a bunch of stuff. Just an old guy with a tractor and a bunch of shipping containers.  215-493-6252

Thank you for this!  I just moved 15 minutes from here and have been looking for a hardwood supplier.

Offline 3PedalMINI

  • Posts: 397
    • Signature Sound & Video
Tague Lumber. There’s one in phoenixville but it’s small. They can generally get anything in within a day from their other locations. Kennet Square has the biggest selection!
The Bitterness of poor quality remains long after the sweetness of low price is forgotten -Benjamin Franklin

Professional Custom Audio Video System Designer/Installer serving Southern - Middle NJ, Eastern PA & the Surrounding Shore Points.
www.sigsv.com

Kapex 120,TS55,RO150,ETS125,CT-26,CT-MIDI,Tradesmen Cleaning Kit, Festool Ratchet Kit, Sys-lite, Sys Roll Cart, T18 +3, 2013 Centrotec Kit, Carvex 420, Carvex Accessory Kit, CXS,RO90, TI15 and Various Festool Systainers