Author Topic: Working with Valchromat  (Read 2608 times)

0 Members and 1 Guest are viewing this topic.

Offline Euclid

  • Posts: 120
Working with Valchromat
« on: March 04, 2017, 03:56 AM »
Anyone have experience with Valchromat?

I’m thinking of using this for some surfaces and doors in a suite of furniture for a design studio.
The overall look would be a combination of birch ply and the Valchromat, all with a (more-or-less) clear finish - lacquer or whatever - with a few smaller non-sheet-goods parts picked out in brighter painted colours, textures, or raw aluminium details.
(I’m not good at paint finishes, so largely designing them out of the equation!)

Will the Valchromat need the same sort of handling as regular mdf with regard to sanding and absorbency (especially the edges); I’ve been told it cuts and machines more cleanly, but I’ve never handled the stuff the before.

I’m assuming the same considerations re. dust and health apply as for mdf.

I’m thinking I should just invest in a sheet and experiment before committing myself to this, but any experiences you could share of handling, machining (I’ll have mostly cutting and drilling to do, with only a little routing), gluing, finishing and how the colours respond to finishes, would be welcomed.

Thank you!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline mo siopa

  • Posts: 80
Re: Working with Valchromat
« Reply #1 on: May 27, 2017, 02:15 AM »
It will machine and finish better than mdf.  You can even carve it by hand.
Can somebody tell me what kind of a world we live in where a man, dressed up as a bat, gets all of my press?