« previous next »
Pages: [1]   Go Down

Author Topic: Simple Cabinet Software with CutSheets  (Read 8389 times)

0 Members and 1 Guest are viewing this topic.

Offline blaszcsj

  • Posts: 265
Simple Cabinet Software with CutSheets
« on: February 19, 2016, 12:12 PM »
I have looked all over this forum and found a few references to Polyboard and Sketchlist. I have access to solidworks and ProE, but engineering software takes a lot of time to build  what the canned functions of the cabinet software output. I just want something that is reasonable in cost to make some quick plans and cut sheets to simplify my builds and be able to work quicker. Please let me know your guys thoughts!

http://www.boole.eu/telechargements_eng.php

http://sketchlist.com/
Logged
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TS55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT |

Offline bkharman

  • Posts: 1866
Re: Simple Cabinet Software with CutSheets
« Reply #1 on: February 19, 2016, 12:19 PM »
Hey mate.

I use a site called optimalon.com. It is great to load up my cut list and it shows how many sheets and the cut layout.

It is free and has worked out great for me over the years.

Cheers. Bryan.
Logged
People, I just want to say, you know, can we all get along? Can we get along?

Offline jdm5

  • Posts: 80
Re: Simple Cabinet Software with CutSheets
« Reply #2 on: February 19, 2016, 12:28 PM »
+1 for Optimalon - relative novice here but it's free for what I need and seems to work great.
Logged
Drank the green Kool-Aid...gave up counting long ago.

Offline Sparktrician

  • Posts: 3274
Re: Simple Cabinet Software with CutSheets
« Reply #3 on: February 19, 2016, 05:55 PM »
I use Cutlist Plus, but have heard positive comments about MaxCut.  MaxCut is a freebie, too. 
Logged
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline Don T

  • Posts: 1685
  • Phoenix, Az
Re: Simple Cabinet Software with CutSheets
« Reply #4 on: February 19, 2016, 08:12 PM »
I've heard good things about cultist but if you are a Mac person that software does not work. Or at least when I looking at it.
Logged
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS

Offline blaszcsj

  • Posts: 265
Re: Simple Cabinet Software with CutSheets
« Reply #5 on: February 19, 2016, 08:59 PM »
Thanks for the input! I should be able to port that from my cad models at the very least.  Do you know of any programs that can do the cabinet design portion as well?
Logged
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TS55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT |

Offline JBag09

  • Posts: 147
Re: Simple Cabinet Software with CutSheets
« Reply #6 on: February 20, 2016, 08:48 AM »
I use CabinetPlanner for the design of kitchen cabinets and some others. Only problem is doing a custom cabinet, haven't quite figured that out yet. And then I put all the sizes into cultist plus for the sheet layout. That program is great. Need to figure out how to import Planner into cultist, a lot less typing then
Logged

Offline tjbnwi

  • Posts: 4862
  • Cedar Tucky Indiana
Re: Simple Cabinet Software with CutSheets
« Reply #7 on: February 21, 2016, 12:31 PM »
I use Cabinet Vision and Sketch List 3D. Both have their place for me.

Tom
Logged
Pages: [1]   Go Up
« previous next »