Author Topic: A new kid on the block (Protool SYS-Tool Box)  (Read 7791 times)

0 Members and 1 Guest are viewing this topic.

Offline neeleman

  • Posts: 1169
A new kid on the block (Protool SYS-Tool Box)
« on: September 08, 2012, 08:36 AM »
There is another new SYS-TB (ToolBox).
This time it's a SYS2 version from Protool although a Festool version might also be on it way like the SYS1 version.

Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Paul Uk

  • Posts: 10
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #1 on: September 08, 2012, 08:41 AM »
Looks good.

I have one sys1 and had been planning on buying 3 more, might have to wait with the purchase until sys2 is available in uk.

Offline jmbfestool

  • Posts: 6567
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #2 on: September 08, 2012, 10:50 AM »
I gave my Two sys 1s to my mum cus they where a little to shallow for me  but this one looks more useful maybe!   I might think about abit more though this time instead of just buying two finding they dont really work for me.   

What would make them FAR FAR FAR FAR FAR FAR more usefull  if the Handle slides down so its flush with the top so at least you can stack normal systainers when they are not in use.

JMB
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline waynelang2001

  • Posts: 506
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #3 on: September 08, 2012, 01:16 PM »
Yeah a sys2 festool toolbox would work for me...... [drooling]
Latest Festool purchase?? The CXS.....Next Festool purchase???? The Domino.....

http://www.facebook.com/pages/Langley-Woodworks/147551115290424

Offline Alan m

  • Posts: 3297
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #4 on: September 08, 2012, 05:32 PM »
I gave my Two sys 1s to my mum cus they where a little to shallow for me  but this one looks more useful maybe!   I might think about abit more though this time instead of just buying two finding they dont really work for me.   

What would make them FAR FAR FAR FAR FAR FAR more usefull  if the Handle slides down so its flush with the top so at least you can stack normal systainers when they are not in use.

JMB
thats the one reason i havent bought these. i like the idea of one open box on the top of the stack or vac but i would like to be able to put a sys on top even just to open it. the handle should slide down or pivot out of the way
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)

Offline Zack

  • Posts: 43
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #5 on: October 07, 2012, 06:18 PM »
Any idea if and when these will be available in the states?

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 10787
  • Let's Redux / Revive / Rewind / Rollback the FOG!
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #6 on: October 07, 2012, 06:57 PM »
I don't know if the ProTool version will be here any time soon.  Tanos makes these boxes and the systainers for Festool and Protool.  You can get the Tanos version in two different colors at My Systainer.com.  When you get the their site search for toolbox.

Peter
Disclaimer:  I have been involved with the development of some TSO Products.  I have offered thoughts and ideas freely.  I am not paid but I may receive products during the development process or afterwards.

Offline Zack

  • Posts: 43
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #7 on: October 08, 2012, 03:37 PM »
I don't know if the ProTool version will be here any time soon.  Tanos makes these boxes and the systainers for Festool and Protool.  You can get the Tanos version in two different colors at My Systainer.com.  When you get the their site search for toolbox.

Peter

Thanks for the link Peter, I'm interested in the deeper ProTool version as seen, maybe Tanos or Festool will introduce a deeper toolbox available to customers in the states...

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7944
  • Finger Lakes Region, NY State , USA
Re: A new kid on the block (Protool SYS-Tool Box)
« Reply #8 on: October 11, 2012, 12:13 AM »
I gave my Two sys 1s to my mum cus they where a little to shallow for me  but this one looks more useful maybe!   I might think about abit more though this time instead of just buying two finding they dont really work for me.   

What would make them FAR FAR FAR FAR FAR FAR more usefull  if the Handle slides down so its flush with the top so at least you can stack normal systainers when they are not in use.

JMB
thats the one reason i havent bought these. i like the idea of one open box on the top of the stack or vac but i would like to be able to put a sys on top even just to open it. the handle should slide down or pivot out of the way

I have one and it is handy. The idea of the handle being foldable or collapsable would be good. That way a regular could be placed on top to close (cover) the toolbox version for transport.

Seth