Author Topic: Attic Storage -- show us what your set-up looks like  (Read 13081 times)

0 Members and 1 Guest are viewing this topic.

Offline ScotF

  • Posts: 2247
Attic Storage -- show us what your set-up looks like
« on: January 03, 2017, 01:05 AM »
I just brought home a new PDC and I am curious how others have set-up their attics - what do you typically store there - do you use all the compartments for screws and bits? Would appreciate reading and seeing some examples to get some ideas.

Thanks!

Offline Billy stray

  • Posts: 273
Re: Attic Storage -- show us what your set-up looks like
« Reply #1 on: January 04, 2017, 06:50 PM »
I don't have a pic on hand but I use mine for all the screw tips and frequently used drill bits etc that I need when using the drill / impact set up that lives in that systainer
Billy

Offline GarryMartin

  • Posts: 1538
Re: Attic Storage -- show us what your set-up looks like
« Reply #2 on: January 05, 2017, 04:10 AM »
[NOTE: Tools from other manufacturers are of course available. As this is the Festool Owners Group, I tend to limit my advice to the tools that Festool sell, and assume that you've come to this site to get advice on Festool tools and because the level of skill and experience of the community here outstrips most you'll find elsewhere. If you *are* interested in tools from other manufacturers, please mention it in your post and also take the time to visit their user forums too.]

UK and Southern Ireland Members  |  Supplemental Manuals  |  Festool Links  |  Festool UK Spare Parts

Offline #Tee

  • Posts: 699
Re: Attic Storage -- show us what your set-up looks like
« Reply #3 on: January 06, 2017, 02:18 PM »
(Attachment Link)

garry! i need this...how can i make it happen? thanks! [smile]
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline rst

  • Posts: 1368
Re: Attic Storage -- show us what your set-up looks like
« Reply #4 on: January 06, 2017, 02:38 PM »
Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

Offline GarryMartin

  • Posts: 1538
Re: Attic Storage -- show us what your set-up looks like
« Reply #5 on: January 06, 2017, 03:15 PM »
garry! i need this...how can i make it happen? thanks! [smile]

Some of the bits are from the Centrotec Installers set, and there's a Veritas tapered plug cutter in there too.

I basically bought two 769094 bit assortments (the second just to get the plastic bits basically!), a 769093 wood bit set, and a 492512 3mm Centrotec wood bit.

https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769094
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769093
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=492512
[NOTE: Tools from other manufacturers are of course available. As this is the Festool Owners Group, I tend to limit my advice to the tools that Festool sell, and assume that you've come to this site to get advice on Festool tools and because the level of skill and experience of the community here outstrips most you'll find elsewhere. If you *are* interested in tools from other manufacturers, please mention it in your post and also take the time to visit their user forums too.]

UK and Southern Ireland Members  |  Supplemental Manuals  |  Festool Links  |  Festool UK Spare Parts

Offline Kevin D.

  • Posts: 839
Re: Attic Storage -- show us what your set-up looks like
« Reply #6 on: January 06, 2017, 03:58 PM »
Murphy!  I thought this thread was about storage in a house's attic.  Doh!
Kapex, CT36AC, TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Hat, Festool T-Shirt (2), Festool Floor Mat, Festool Stein, Multi-Tool, tape measure, large and small Festool floor mats (foam rubber).

Offline DB10

  • Posts: 818
Re: Attic Storage -- show us what your set-up looks like
« Reply #7 on: January 06, 2017, 07:28 PM »
T15 Impact and PDC,

Offline ScotF

  • Posts: 2247
Re: Attic Storage -- show us what your set-up looks like
« Reply #8 on: January 06, 2017, 09:26 PM »
Excellent pics...love seeing the set-ups. Anyone use it for screws?

Offline #Tee

  • Posts: 699
Re: Attic Storage -- show us what your set-up looks like
« Reply #9 on: January 07, 2017, 02:37 PM »
Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

thanks for the info !
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline #Tee

  • Posts: 699
Re: Attic Storage -- show us what your set-up looks like
« Reply #10 on: January 07, 2017, 02:38 PM »
garry! i need this...how can i make it happen? thanks! [smile]

Some of the bits are from the Centrotec Installers set, and there's a Veritas tapered plug cutter in there too.

I basically bought two 769094 bit assortments (the second just to get the plastic bits basically!), a 769093 wood bit set, and a 492512 3mm Centrotec wood bit.

https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769094
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769093
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=492512

awesome! thanks for the spoon feed gerry!
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline Cheese

  • Posts: 2889
Re: Attic Storage -- show us what your set-up looks like
« Reply #11 on: January 07, 2017, 03:13 PM »
This is on an Imperial Installers Set 201312.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 7575
  • Finger Lakes Region, NY State , USA
Re: Attic Storage -- show us what your set-up looks like
« Reply #12 on: January 07, 2017, 03:35 PM »
Good idea ... the added labeling on the self-centering bits.

Hmmm, one 1/4" wrench................ that must have a specific use?

Seth

Offline Cheese

  • Posts: 2889
Re: Attic Storage -- show us what your set-up looks like
« Reply #13 on: January 07, 2017, 04:12 PM »
Hmmm, one 1/4" wrench................ that must have a specific use?

Ya it does Seth...combine that 1/4" ratcheting hex wrench with any short 1/4" hex drive bit and the combo can get into any small area that was impossible before. Think single metal electrical boxes mounted to studs through the sidewall of the box.  [smile]

Offline Staniam

  • Posts: 683
  • Enjoy what you do. Build something.
Re: Attic Storage -- show us what your set-up looks like
« Reply #14 on: January 07, 2017, 06:17 PM »


This has by far been my favorite attic setup. The Milwaukee titanium drill bit set fits perfectly.

Sent from my SAMSUNG-SM-N920A using Tapatalk

LA Lakers - Oakland Athletics
The Arsenal: Festool - PDC, CXS, RO 125, TS55 REQ, OF 1010 EQ, CT MIDI;  Bosch - JS572EBL, JS120, 1294VSK, PS22

Offline ScotF

  • Posts: 2247
Re: Attic Storage -- show us what your set-up looks like
« Reply #15 on: January 08, 2017, 12:10 AM »
What is the bottom lined with, @Staniam?

Looks like a great set-up.

Offline ScotF

  • Posts: 2247
Re: Attic Storage -- show us what your set-up looks like
« Reply #16 on: January 08, 2017, 12:14 AM »

Offline Staniam

  • Posts: 683
  • Enjoy what you do. Build something.
Re: Attic Storage -- show us what your set-up looks like
« Reply #17 on: January 08, 2017, 01:21 AM »
(Attachment Link)

What is the bit in the bottom left of the attic, @GarryMartin?

Looks like a counter sink bit. Like the one in the top middle of my picture. And a smaller counter sink next to it.
LA Lakers - Oakland Athletics
The Arsenal: Festool - PDC, CXS, RO 125, TS55 REQ, OF 1010 EQ, CT MIDI;  Bosch - JS572EBL, JS120, 1294VSK, PS22

Offline jobsworth

  • Posts: 4238
  • Burger Babe Says: I Even Buy Green Bananas
Re: Attic Storage -- show us what your set-up looks like
« Reply #18 on: January 08, 2017, 03:49 AM »
Now you guys got me ready to buy a attic storage systainer , just to store some of my small bit boxes for my C 15.....

yer killing me doncha know
Coming Home Soon

Offline GarryMartin

  • Posts: 1538
Re: Attic Storage -- show us what your set-up looks like
« Reply #19 on: January 08, 2017, 04:13 AM »
What is the bit in the bottom left of the attic, @GarryMartin?

If you mean the very bottom left, it's one of the Festool Deburring countersinks from the Installer Set. If you mean the third in from the left, that's the Veritas Tapered Snug Plug cutter.
[NOTE: Tools from other manufacturers are of course available. As this is the Festool Owners Group, I tend to limit my advice to the tools that Festool sell, and assume that you've come to this site to get advice on Festool tools and because the level of skill and experience of the community here outstrips most you'll find elsewhere. If you *are* interested in tools from other manufacturers, please mention it in your post and also take the time to visit their user forums too.]

UK and Southern Ireland Members  |  Supplemental Manuals  |  Festool Links  |  Festool UK Spare Parts

Offline mac sparrow

  • Posts: 160
Re: Attic Storage -- show us what your set-up looks like
« Reply #20 on: January 08, 2017, 03:02 PM »
I really enjoy using the attic storage system for my most commonly used bits plus some additional "nice to haves" that when you need them and you discover you have it, it's like winning the lottery.

Offline leer

  • Posts: 255
Re: Attic Storage -- show us what your set-up looks like
« Reply #21 on: January 08, 2017, 05:35 PM »
Murphy!  I thought this thread was about storage in a house's attic.  Doh!

Me too!  I decked half of our garage attic last year with OSB. When winter is over, will do the rest.  A few years ago I installed a pull-down ladder.  (I'm getting too old to be hauling my wife's enormous collection of Christmas decorations, in about 40 plastic totes, in and out of our basement crawl space.)   :)
Lee

Offline ScotF

  • Posts: 2247
Re: Attic Storage -- show us what your set-up looks like
« Reply #22 on: January 08, 2017, 10:03 PM »
What is the bit in the bottom left of the attic, @GarryMartin?

If you mean the very bottom left, it's one of the Festool Deburring countersinks from the Installer Set. If you mean the third in from the left, that's the Veritas Tapered Snug Plug cutter.

Thanks - I have not seen a "deburring" bit in NA. Very cool.

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 813
  • I make sculptural furniture.
    • Flair Woodworks
Re: Attic Storage -- show us what your set-up looks like
« Reply #23 on: January 08, 2017, 10:59 PM »
You know that you can put router bits in there, too, right? https://www.instagram.com/p/BNQAKngl0Sr/
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline ScotF

  • Posts: 2247
Re: Attic Storage -- show us what your set-up looks like
« Reply #24 on: January 08, 2017, 11:30 PM »
You know that you can put router bits in there, too, right? https://www.instagram.com/p/BNQAKngl0Sr/

That would be great to add a lid to a router...

Offline Cheese

  • Posts: 2889
Re: Attic Storage -- show us what your set-up looks like
« Reply #25 on: January 09, 2017, 01:14 PM »
Thanks - I have not seen a "deburring" bit in NA. Very cool.

Hey @ScotF
FWIW...here's a shot of 7 different sized countersinks. Far left is a Norseman in moly tool steel, the next 4 are from Keo and are made of cobalt, while the last 2 on the right are from Festool. All are meant to be used on wood, plastics and non-ferrous metals such as aluminum, copper or brass.

Because the Keo's are cobalt, they could be used for lightly deburring steel or stainless. Most countersinks are available with 60º, 82º or 90º ends. All of those pictured are 82º which is used for the common flathead screw.

Offline rst

  • Posts: 1368
Re: Attic Storage -- show us what your set-up looks like
« Reply #26 on: January 09, 2017, 01:45 PM »
The countersinks Cheese is showing are Weldon style and common for working non ferrous metal and are available in lots of different sizes from metal working distributors.

Offline Ocram

  • Posts: 57
Re: Attic Storage -- show us what your set-up looks like
« Reply #27 on: January 09, 2017, 04:48 PM »
I like te attic storage too. Very handy for the most used bits and drills.

A small improvement in my opinion would be that the bit holders would move the opposite direction. That way the heavy bits won't come loose when opening the systainer if the compartment isn't closed. Happened to me a few times  [unsure]

256998-0

Offline ScotF

  • Posts: 2247
Re: Attic Storage -- show us what your set-up looks like
« Reply #28 on: January 09, 2017, 08:53 PM »
Thanks - I have not seen a "deburring" bit in NA. Very cool.

Hey @ScotF
FWIW...here's a shot of 7 different sized countersinks. Far left is a Norseman in moly tool steel, the next 4 are from Keo and are made of cobalt, while the last 2 on the right are from Festool. All are meant to be used on wood, plastics and non-ferrous metals such as aluminum, copper or brass.

Because the Keo's are cobalt, they could be used for lightly deburring steel or stainless. Most countersinks are available with 60º, 82º or 90º ends. All of those pictured are 82º which is used for the common flathead screw.

Thanks for the front picture! Very helpful. I looked like a tenon cutter or something from the back view.

Offline grobkuschelig

  • Posts: 49
Re: Attic Storage -- show us what your set-up looks like
« Reply #29 on: January 12, 2017, 05:41 PM »
Hi. So my attic looks like they do in real life. A huge mess...;)

Contents in the smaller segments might switch around a bit, but I really like to have the "ultimate" needs in order in the center and then be able to just throw anything I might need right in.