Author Topic: Attic Storage -- show us what your set-up looks like  (Read 22568 times)

0 Members and 1 Guest are viewing this topic.

Offline ScotF

  • Posts: 2393
Attic Storage -- show us what your set-up looks like
« on: January 03, 2017, 01:05 AM »
I just brought home a new PDC and I am curious how others have set-up their attics - what do you typically store there - do you use all the compartments for screws and bits? Would appreciate reading and seeing some examples to get some ideas.

Thanks!

Offline Billy stray

  • Posts: 292
Re: Attic Storage -- show us what your set-up looks like
« Reply #1 on: January 04, 2017, 06:50 PM »
I don't have a pic on hand but I use mine for all the screw tips and frequently used drill bits etc that I need when using the drill / impact set up that lives in that systainer
Billy


Offline #Tee

  • Posts: 786
Re: Attic Storage -- show us what your set-up looks like
« Reply #3 on: January 06, 2017, 02:18 PM »
(Attachment Link)

garry! i need this...how can i make it happen? thanks! [smile]
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline rst

  • Posts: 1672
Re: Attic Storage -- show us what your set-up looks like
« Reply #4 on: January 06, 2017, 02:38 PM »
Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

Offline GarryMartin

  • Posts: 1650
Re: Attic Storage -- show us what your set-up looks like
« Reply #5 on: January 06, 2017, 03:15 PM »
garry! i need this...how can i make it happen? thanks! [smile]

Some of the bits are from the Centrotec Installers set, and there's a Veritas tapered plug cutter in there too.

I basically bought two 769094 bit assortments (the second just to get the plastic bits basically!), a 769093 wood bit set, and a 492512 3mm Centrotec wood bit.

https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769094
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769093
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=492512

Offline Kevin D.

  • Posts: 851
Re: Attic Storage -- show us what your set-up looks like
« Reply #6 on: January 06, 2017, 03:58 PM »
Murphy!  I thought this thread was about storage in a house's attic.  Doh!
Kapex, CT36AC, TS75, MFT 1080, MF-SYS/2, PS300 EQ-Plus, Parallel Guides Set, LR32 SYS, RO 150FEQ-Plus, OF1400 EQ Plus, DOMINO 500 Q-Plus,  MFK 700 EQ-Set, FS-SYS/2, CT22 w/hose storage, D36HW-RS-Plus, FS 1900/2, FS 3000/2, FS 1080/2-LR32, FS 1400/2-LR32, Gecko, Festool Hat, Festool T-Shirt (2), Festool Floor Mat, Festool Stein, Multi-Tool, tape measure, large and small Festool floor mats (foam rubber).

Offline DB10

  • Posts: 911
Re: Attic Storage -- show us what your set-up looks like
« Reply #7 on: January 06, 2017, 07:28 PM »
T15 Impact and PDC,

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #8 on: January 06, 2017, 09:26 PM »
Excellent pics...love seeing the set-ups. Anyone use it for screws?

Offline #Tee

  • Posts: 786
Re: Attic Storage -- show us what your set-up looks like
« Reply #9 on: January 07, 2017, 02:37 PM »
Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

thanks for the info !
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline #Tee

  • Posts: 786
Re: Attic Storage -- show us what your set-up looks like
« Reply #10 on: January 07, 2017, 02:38 PM »
garry! i need this...how can i make it happen? thanks! [smile]

Some of the bits are from the Centrotec Installers set, and there's a Veritas tapered plug cutter in there too.

I basically bought two 769094 bit assortments (the second just to get the plastic bits basically!), a 769093 wood bit set, and a 492512 3mm Centrotec wood bit.

https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769094
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=769093
https://www.festool.com/Products/Accessories/Pages/Detail.aspx?pid=492512

awesome! thanks for the spoon feed gerry!
When youre feeling depressed just treat yourself to a systainer even if its a mini systainer its ok.

IG: tee212

Offline Cheese

  • Posts: 3996
Re: Attic Storage -- show us what your set-up looks like
« Reply #11 on: January 07, 2017, 03:13 PM »
This is on an Imperial Installers Set 201312.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8202
  • Finger Lakes Region, NY State , USA
Re: Attic Storage -- show us what your set-up looks like
« Reply #12 on: January 07, 2017, 03:35 PM »
Good idea ... the added labeling on the self-centering bits.

Hmmm, one 1/4" wrench................ that must have a specific use?

Seth

Offline Cheese

  • Posts: 3996
Re: Attic Storage -- show us what your set-up looks like
« Reply #13 on: January 07, 2017, 04:12 PM »
Hmmm, one 1/4" wrench................ that must have a specific use?

Ya it does Seth...combine that 1/4" ratcheting hex wrench with any short 1/4" hex drive bit and the combo can get into any small area that was impossible before. Think single metal electrical boxes mounted to studs through the sidewall of the box.  [smile]

Offline Staniam

  • Posts: 683
  • Enjoy what you do. Build something.
Re: Attic Storage -- show us what your set-up looks like
« Reply #14 on: January 07, 2017, 06:17 PM »


This has by far been my favorite attic setup. The Milwaukee titanium drill bit set fits perfectly.

Sent from my SAMSUNG-SM-N920A using Tapatalk

LA Lakers - Oakland Athletics
The Arsenal: Festool - PDC, CXS, RO 125, TS55 REQ, OF 1010 EQ, CT MIDI;  Bosch - JS572EBL, JS120, 1294VSK, PS22

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #15 on: January 08, 2017, 12:10 AM »
What is the bottom lined with, @Staniam?

Looks like a great set-up.

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #16 on: January 08, 2017, 12:14 AM »

Offline Staniam

  • Posts: 683
  • Enjoy what you do. Build something.
Re: Attic Storage -- show us what your set-up looks like
« Reply #17 on: January 08, 2017, 01:21 AM »
(Attachment Link)

What is the bit in the bottom left of the attic, @GarryMartin?

Looks like a counter sink bit. Like the one in the top middle of my picture. And a smaller counter sink next to it.
LA Lakers - Oakland Athletics
The Arsenal: Festool - PDC, CXS, RO 125, TS55 REQ, OF 1010 EQ, CT MIDI;  Bosch - JS572EBL, JS120, 1294VSK, PS22

Offline jobsworth

  • Posts: 4696
  • Burger Babe Says: I Even Buy Green Bananas
Re: Attic Storage -- show us what your set-up looks like
« Reply #18 on: January 08, 2017, 03:49 AM »
Now you guys got me ready to buy a attic storage systainer , just to store some of my small bit boxes for my C 15.....

yer killing me doncha know
Loving the Calif sun....

Offline GarryMartin

  • Posts: 1650
Re: Attic Storage -- show us what your set-up looks like
« Reply #19 on: January 08, 2017, 04:13 AM »
What is the bit in the bottom left of the attic, @GarryMartin?

If you mean the very bottom left, it's one of the Festool Deburring countersinks from the Installer Set. If you mean the third in from the left, that's the Veritas Tapered Snug Plug cutter.

Offline mackenzie

  • Posts: 178
Re: Attic Storage -- show us what your set-up looks like
« Reply #20 on: January 08, 2017, 03:02 PM »
I really enjoy using the attic storage system for my most commonly used bits plus some additional "nice to haves" that when you need them and you discover you have it, it's like winning the lottery.

Offline leer

  • Posts: 255
Re: Attic Storage -- show us what your set-up looks like
« Reply #21 on: January 08, 2017, 05:35 PM »
Murphy!  I thought this thread was about storage in a house's attic.  Doh!

Me too!  I decked half of our garage attic last year with OSB. When winter is over, will do the rest.  A few years ago I installed a pull-down ladder.  (I'm getting too old to be hauling my wife's enormous collection of Christmas decorations, in about 40 plastic totes, in and out of our basement crawl space.)   :)
Lee

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #22 on: January 08, 2017, 10:03 PM »
What is the bit in the bottom left of the attic, @GarryMartin?

If you mean the very bottom left, it's one of the Festool Deburring countersinks from the Installer Set. If you mean the third in from the left, that's the Veritas Tapered Snug Plug cutter.

Thanks - I have not seen a "deburring" bit in NA. Very cool.

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 865
  • I make sculptural furniture.
    • Flair Woodworks
Re: Attic Storage -- show us what your set-up looks like
« Reply #23 on: January 08, 2017, 10:59 PM »
You know that you can put router bits in there, too, right? https://www.instagram.com/p/BNQAKngl0Sr/
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #24 on: January 08, 2017, 11:30 PM »
You know that you can put router bits in there, too, right? https://www.instagram.com/p/BNQAKngl0Sr/

That would be great to add a lid to a router...

Offline Cheese

  • Posts: 3996
Re: Attic Storage -- show us what your set-up looks like
« Reply #25 on: January 09, 2017, 01:14 PM »
Thanks - I have not seen a "deburring" bit in NA. Very cool.

Hey @ScotF
FWIW...here's a shot of 7 different sized countersinks. Far left is a Norseman in moly tool steel, the next 4 are from Keo and are made of cobalt, while the last 2 on the right are from Festool. All are meant to be used on wood, plastics and non-ferrous metals such as aluminum, copper or brass.

Because the Keo's are cobalt, they could be used for lightly deburring steel or stainless. Most countersinks are available with 60º, 82º or 90º ends. All of those pictured are 82º which is used for the common flathead screw.

Offline rst

  • Posts: 1672
Re: Attic Storage -- show us what your set-up looks like
« Reply #26 on: January 09, 2017, 01:45 PM »
The countersinks Cheese is showing are Weldon style and common for working non ferrous metal and are available in lots of different sizes from metal working distributors.

Offline Ocram

  • Posts: 57
Re: Attic Storage -- show us what your set-up looks like
« Reply #27 on: January 09, 2017, 04:48 PM »
I like te attic storage too. Very handy for the most used bits and drills.

A small improvement in my opinion would be that the bit holders would move the opposite direction. That way the heavy bits won't come loose when opening the systainer if the compartment isn't closed. Happened to me a few times  [unsure]

256998-0

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #28 on: January 09, 2017, 08:53 PM »
Thanks - I have not seen a "deburring" bit in NA. Very cool.

Hey @ScotF
FWIW...here's a shot of 7 different sized countersinks. Far left is a Norseman in moly tool steel, the next 4 are from Keo and are made of cobalt, while the last 2 on the right are from Festool. All are meant to be used on wood, plastics and non-ferrous metals such as aluminum, copper or brass.

Because the Keo's are cobalt, they could be used for lightly deburring steel or stainless. Most countersinks are available with 60º, 82º or 90º ends. All of those pictured are 82º which is used for the common flathead screw.

Thanks for the front picture! Very helpful. I looked like a tenon cutter or something from the back view.

Offline grobkuschelig

  • Posts: 263
Re: Attic Storage -- show us what your set-up looks like
« Reply #29 on: January 12, 2017, 05:41 PM »
Hi. So my attic looks like they do in real life. A huge mess...;)

Contents in the smaller segments might switch around a bit, but I really like to have the "ultimate" needs in order in the center and then be able to just throw anything I might need right in.


Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 865
  • I make sculptural furniture.
    • Flair Woodworks
Re: Attic Storage -- show us what your set-up looks like
« Reply #30 on: January 12, 2017, 11:26 PM »
A small improvement in my opinion would be that the bit holders would move the opposite direction. That way the heavy bits won't come loose when opening the systainer if the compartment isn't closed. Happened to me a few times  [unsure]
You can pop out the tilting racks and put them back in the other way if you want...
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #31 on: January 13, 2017, 12:18 AM »
Hi. So my attic looks like they do in real life. A huge mess...;)

Contents in the smaller segments might switch around a bit, but I really like to have the "ultimate" needs in order in the center and then be able to just throw anything I might need right in.

Looks like you can pack quite a bit in there...good stuff!

Offline vogel61

  • Posts: 17
Re: Attic Storage -- show us what your set-up looks like
« Reply #32 on: January 13, 2017, 01:30 AM »


Here is my Attic setup. I haven't finished the proper printing for the drills, 5mm is actually 6mm and 6mm is actually 7mm.

Gesendet von meinem SM-G935F mit Tapatalk


Offline GarryMartin

  • Posts: 1650
Re: Attic Storage -- show us what your set-up looks like
« Reply #33 on: January 13, 2017, 06:43 AM »
You can pop out the tilting racks and put them back in the other way if you want...

Errr... you can't Chris; at least I can't. My trays are shaped for orientation, and the racks themselves have different sized holes on one side than the other, so I can't put mine in the other way around. Do you have something different? Have you tried?

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 865
  • I make sculptural furniture.
    • Flair Woodworks
Re: Attic Storage -- show us what your set-up looks like
« Reply #34 on: January 13, 2017, 10:27 AM »
You can pop out the tilting racks and put them back in the other way if you want...

Errr... you can't Chris; at least I can't. My trays are shaped for orientation, and the racks themselves have different sized holes on one side than the other, so I can't put mine in the other way around. Do you have something different? Have you tried?

Don't turn around the trays - just the tilting bit holders that fit inside the tray.
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline Cochese

  • Posts: 259
    • The 144 Workshop
Re: Attic Storage -- show us what your set-up looks like
« Reply #35 on: January 13, 2017, 10:54 AM »
Tee, Lee Valley sells Tanos systainers, including a SysII with attic lid and also the Bit Storage Tray for Systainer® Case with Lid Storage.  .  You can either do a search for Tanos which wil show the entire line, or the fore mentioned discription.  I've bought quite a few Tanos and other items such as their Veritas® Mk.II Honing Guide System.  Great vendor three thumbs up!!  [big grin]

I didn't realize these existed. A conversation in 2013/4 found nothing like this.

I'd buy the 769094, but it's another one of Festool's infuriating NAINA decisions, and I'm not paying upwards of $100 for a grey market import either.

Offline GarryMartin

  • Posts: 1650
Re: Attic Storage -- show us what your set-up looks like
« Reply #36 on: January 13, 2017, 11:40 AM »
Don't turn around the trays - just the tilting bit holders that fit inside the tray.

I think we must have different trays - the holes in each side of mine are different sizes so you can't turn them around.  [crying]

« Last Edit: January 13, 2017, 11:42 AM by GarryMartin »

Offline Ocram

  • Posts: 57
Re: Attic Storage -- show us what your set-up looks like
« Reply #37 on: January 13, 2017, 02:23 PM »
I tried it already and there is no way to switch the tray or bit holder without a modification.  And if you do a modification the little handle on the front side of the tray disappears under the cover so it is not easily removed without removing the cover. So I'll just have to remember to close the cover [big grin]

Greeting Ocram

(I hope my writing is okay)

Offline jobsworth

  • Posts: 4696
  • Burger Babe Says: I Even Buy Green Bananas
Re: Attic Storage -- show us what your set-up looks like
« Reply #38 on: January 14, 2017, 04:08 AM »
You guys got me again, I got one coming. It should be here Monday, along with some festool bling to take to the states with me
Loving the Calif sun....

Offline Ocram

  • Posts: 57
Re: Attic Storage -- show us what your set-up looks like
« Reply #39 on: January 14, 2017, 05:56 AM »
@vogel61 I'm curious, you say that you didn't finished the proper printing. Do you mean that you found a way to print the labels on the bit holders yourself?

Ocram



Here is my Attic setup. I haven't finished the proper printing for the drills, 5mm is actually 6mm and 6mm is actually 7mm.

Gesendet von meinem SM-G935F mit Tapatalk

Offline vogel61

  • Posts: 17
Re: Attic Storage -- show us what your set-up looks like
« Reply #40 on: January 14, 2017, 06:18 AM »
@vogel61 I'm curious, you say that you didn't finished the proper printing. Do you mean that you found a way to print the labels on the bit holders yourself?

Ocram



Here is my Attic setup. I haven't finished the proper printing for the drills, 5mm is actually 6mm and 6mm is actually 7mm.

Gesendet von meinem SM-G935F mit Tapatalk
I did remove the original printing on the bit holder to the right (apologies for the picture being rotated 180°, it looks proper on my mobile display) with fine grid sandpaper, then fiddled around alot with my DYMO label printer printing icons for the philips and slotted bits on transparent stripes. If you look closely, it is not perfect, but it works for me. I did not do rhis work with the wooden drills, because I  have 4/5/6/7/8/10mm in the holder with original printing for 4/5/5/6/8/10mm. I  will fix this later. Just wanted to share that it can be done  quite easily (if you can spare some time).

Richard

Gesendet von meinem SM-G935F mit Tapatalk


Offline Ocram

  • Posts: 57
Re: Attic Storage -- show us what your set-up looks like
« Reply #41 on: January 14, 2017, 09:06 AM »
@vogel61, I surely could live with it. It is close to perfect.

Thanks for sharing!

Ocram

Offline jobsworth

  • Posts: 4696
  • Burger Babe Says: I Even Buy Green Bananas
Re: Attic Storage -- show us what your set-up looks like
« Reply #42 on: January 16, 2017, 12:27 PM »
Ok guys, Got my attic sys today. So tomorrow Im goig to put the C 18 drill in it along with some things that I dont have space for in my installers set.I might get another one for the C12 and the PS jig saw. Great way to store jig saw bits
Loving the Calif sun....

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 865
  • I make sculptural furniture.
    • Flair Woodworks
Re: Attic Storage -- show us what your set-up looks like
« Reply #43 on: January 17, 2017, 09:45 PM »
So I talked to my customer who turned one bit holder around. He said he needed to reduce the diameter of one of the pivots to get it to work.
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline Greg Powers

  • Posts: 2257
  • Metric convert
    • Stargate Unofficiial
Re: Attic Storage -- show us what your set-up looks like
« Reply #44 on: February 13, 2018, 07:13 PM »
So I talked to my customer who turned one bit holder around. He said he needed to reduce the diameter of one of the pivots to get it to work.

You can flip the tray inserts 180 degrees and snap them in upside down. It works for the two outside trays with out and modification. But the center tray need a little of the top edge clipped off to make it fit under some plastic tabs on the top.
Greg Powers
Size:XL

Offline KongKirill

  • Posts: 44
Re: Attic Storage -- show us what your set-up looks like
« Reply #45 on: February 14, 2018, 04:59 AM »
THIS IS MY FAVOURITE TOPIC ON FOG SO FAR! I LOVE TO SEE PEOPLE ORGANIZING STUFF!!! [thumbs up] [thanks] [thanks] [thanks]

Offline gunnyr

  • Posts: 91
Re: Attic Storage -- show us what your set-up looks like
« Reply #46 on: February 14, 2018, 04:04 PM »
I swapped out the normal lid with an attic lid on my Installer Set and keep various bits and nut drivers in it.
Semper Fi,
Jeff

PRO 5 LTD|TS 55 REQ|CXS|RO 90|RO 150|CT 26|OF 1400|LR 32|DF 500|MFT/3|ETS 150/3|MFS 400/700|MFK 700|HKC 55|PSB 420|PDC 18|CT 48
US Marines - UK Wildcats - Cincinnati Reds

Offline Dick Mahany

  • Posts: 151
Re: Attic Storage -- show us what your set-up looks like
« Reply #47 on: February 14, 2018, 04:46 PM »
I'm liking these attic lid systainers more all the time.  The only problem I have is forgetting to lock the lid before opening the Tloc.  I'll figure it out eventually. :-

[

Offline ScotF

  • Posts: 2393
Re: Attic Storage -- show us what your set-up looks like
« Reply #48 on: February 14, 2018, 11:03 PM »
So I talked to my customer who turned one bit holder around. He said he needed to reduce the diameter of one of the pivots to get it to work.

You can flip the tray inserts 180 degrees and snap them in upside down. It works for the two outside trays with out and modification. But the center tray need a little of the top edge clipped off to make it fit under some plastic tabs on the top.

Greg...any pics you can share?

Offline Greg Powers

  • Posts: 2257
  • Metric convert
    • Stargate Unofficiial
Re: Attic Storage -- show us what your set-up looks like
« Reply #49 on: February 14, 2018, 11:32 PM »
@ScotF This mod took all of 10 Minutes

Photo 1 Shows the two out side trays upside down
Photo 2 the tab that will not allow middle tray to be flipped
Photo 3 area of tray that needs to be removed
Photo 4 has the plastic ground away
Photo 5 all three trays flipped and installed upside down
Photo 6 this is the area of plastic removed to make it fit under the tab

Note: the middle tray must be installed under the tabs first and the opposite end forced down hard to get it in.
« Last Edit: February 14, 2018, 11:42 PM by Greg Powers »
Greg Powers
Size:XL

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8202
  • Finger Lakes Region, NY State , USA
Re: Attic Storage -- show us what your set-up looks like
« Reply #50 on: February 15, 2018, 09:39 AM »
I'm liking these attic lid systainers more all the time.  The only problem I have is forgetting to lock the lid before opening the Tloc.  I'll figure it out eventually. :-



I did this to provide a visual reminder. Red Sharpie.....................   


   


   




Seth

Offline Dick Mahany

  • Posts: 151
Re: Attic Storage -- show us what your set-up looks like
« Reply #51 on: February 15, 2018, 09:48 AM »
I'm liking these attic lid systainers more all the time.  The only problem I have is forgetting to lock the lid before opening the Tloc.  I'll figure it out eventually. :-



I did this to provide a visual reminder. Red Sharpie.....................   


    (Attachment Link)


    (Attachment Link)




Seth


Going out this AM to get a red sharpie, thanks !

Offline Cheese

  • Posts: 3996
Re: Attic Storage -- show us what your set-up looks like
« Reply #52 on: February 15, 2018, 10:05 AM »

I did this to provide a visual reminder. Red Sharpie.....................   


Great idea, I also keep forgetting to lock when I open up the Systainer.  [tongue]