Author Topic: Classic Systainer Foot Template  (Read 2246 times)

0 Members and 1 Guest are viewing this topic.

Offline Scorpion

  • Posts: 555
Classic Systainer Foot Template
« on: March 12, 2018, 08:17 AM »
I made a template for cutting reliefs into shelving for t-loc feet using patterns from a previous thread on FOG.  I haven’t been able to find patterns for the classic systainers.  Does anyone know where to find them? 

TIA


Sent from my iPhone using Tapatalk Pro

Offline Don T

  • Posts: 1790
  • Phoenix, Az
Re: Classic Systainer Foot Template
« Reply #1 on: March 12, 2018, 10:37 AM »
Here is what I saved a while back.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Offline neilc

  • Posts: 2418
Re: Classic Systainer Foot Template
« Reply #2 on: March 12, 2018, 09:14 PM »
Can you share your T-lock Systainer foot template, Matt?  SVG or PDF with dimensions would be great!


thanks -


neil

Offline Mario Turcot

  • Posts: 379
Re: Classic Systainer Foot Template
« Reply #3 on: March 13, 2018, 02:10 PM »
Can you share your T-lock Systainer foot template, Matt?  SVG or PDF with dimensions would be great!


thanks -


neil

@neilc I am going to create one soon, using Easel from Inventables and let you know how it fit in a T-Loc systainer

Mario
Mario

Offline Scorpion

  • Posts: 555
Re: Classic Systainer Foot Template
« Reply #4 on: March 13, 2018, 10:00 PM »
Can you share your T-lock Systainer foot template, Matt?  SVG or PDF with dimensions would be great!


thanks -


neil

Here’s one I’ve had for a while.  I have another I’m still looking for.  I’ll post it as soon as I find it.






Sent from my iPhone using Tapatalk Pro

Offline Scorpion

  • Posts: 555
Re: Classic Systainer Foot Template
« Reply #5 on: March 18, 2018, 10:49 AM »
I’ll post dimensions at some point but here’s what I came up with.   



The feet require square corners so they’re not as fast to cut with a router and teleplay as the t-locs.  After cutting I had to square the edges with a chisel.  Will work just fine though, they retain the systainer the same way as the others.




Sent from my iPhone using Tapatalk Pro

Offline Scorpion

  • Posts: 555
Re: Classic Systainer Foot Template
« Reply #6 on: March 24, 2018, 09:27 AM »
I ended up finding the one I used to make my T-Loc template from.  Turns out it was pinned in Pinterest. 




Sent from my iPhone using Tapatalk Pro