Author Topic: Looking for Inner drawer mesausurements, on Festools T-Loc storage containers  (Read 1440 times)

0 Members and 1 Guest are viewing this topic.

Offline Soundguy99

  • Posts: 1
Hi Guys
I am trying to put togeather a Soldering, Kit, With My soldering Station, Helping hands, solder, Iron holder, assorment of Soldering tips for the gun, and view hand tools.
My problem is the Station is a Weller WES51, and is just under 4 inches tall.
I would like to have 1 or 2 cases (inerlocked), that Has all my stuff togeather so that If I need to do some soldering somewhere I just have to take 1 case.
Looking through all of festools containers, I see dimensions for the outside of the containers but nothing on the inside, to see if my 4inch tall Soldering Iron will fit.
Since I don`t have a Festool dealer nearby, I would have to order it online, which makes it harder as I don`t want to order something without knowing its going to work,
Any thoughts or recommendations is greatly appreciated,
Thanks,
soungduy

Offline live4ever

  • Posts: 790
Here's a thread that should help:
http://festoolownersgroup.com/festool-and-tanos-systainers/systainer-dimensions/

Looks like the Sys II should work for height wise.  It's a little over 4.5 inches in interior space, though remember to factor in space for foam or other protective materials if you plan to line the case.
Current systainer to productivity ratio:  very high

Offline Mario Turcot

  • Posts: 610
Go to that link Tanos T-Loc Systainers and click view of any systainer size, they all the same dimension.
Mario

Offline neeleman

  • Posts: 1211
At Tanos you can find the dimensions of the drawers for T-Loc Combi II+III systainers or Sortainers IV.
Inside dimensions drawer: H 69 x W 350 x D 255 mm
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8647
  • Finger Lakes Region, NY State , USA
Hi Guys
I am trying to put togeather a Soldering, Kit, With My soldering Station, Helping hands, solder, Iron holder, assorment of Soldering tips for the gun, and view hand tools.
My problem is the Station is a Weller WES51, and is just under 4 inches tall.
I would like to have 1 or 2 cases (inerlocked), that Has all my stuff togeather so that If I need to do some soldering somewhere I just have to take 1 case.
Looking through all of festools containers, I see dimensions for the outside of the containers but nothing on the inside, to see if my 4inch tall Soldering Iron will fit.
Since I don`t have a Festool dealer nearby, I would have to order it online, which makes it harder as I don`t want to order something without knowing its going to work,
Any thoughts or recommendations is greatly appreciated,
Thanks,
soungduy



 @Soundguy99

Hi, Welcome to the forum!  [smile]

     Looks like a Sys-II is what you will want.  As said already inside height of bottom is about 4 1/2".  You also get about 1" or so inside the lid space.  You might want to look at the Sys-II Combi. It is a Sys-II size upper portion and a large drawer in the lower. Drawer can be divided  or have bins placed in or customized.  You could also add an attic lid in place of the regular and still have enough interior height. That would give you lots of storage and sorting options for a solder gun set up. Would make a nice handy all in one kit.

Seth