Author Topic: Schedule glitch = a couple pimped out systainers  (Read 2825 times)

0 Members and 1 Guest are viewing this topic.

Offline Billy stray

  • Posts: 317
Schedule glitch = a couple pimped out systainers
« on: February 15, 2019, 10:52 PM »
I decided to turn a schedule problem into a positive
Of course I told the wife I was legitimately working in the shop 😉👌
Billy

Offline dlu

  • Posts: 161
Re: Schedule glitch = a couple pimped out systainers
« Reply #1 on: February 16, 2019, 03:52 AM »
It is so not cool to post of photo of a Systainer with gauges and holes and not a word of explanation or a photo of the inside!  :)

Offline Coen

  • Posts: 442
Re: Schedule glitch = a couple pimped out systainers
« Reply #2 on: February 16, 2019, 11:32 AM »
It's a butane powered pressure cooker ofc.

Offline Billy stray

  • Posts: 317
Re: Schedule glitch = a couple pimped out systainers
« Reply #3 on: February 16, 2019, 11:40 AM »
Lol...sorry my bad, its another senco 10 10 in a sys 4
I'm so sure these pics will come through sideways too
My apologies
« Last Edit: February 16, 2019, 12:11 PM by Billy stray »
Billy

Offline dlu

  • Posts: 161
Re: Schedule glitch = a couple pimped out systainers
« Reply #4 on: February 16, 2019, 01:30 PM »
Thank you. Very nicely done! I've never seen the little Senco IRL did you have to do much to it to get it to fit?

Offline Billy stray

  • Posts: 317
Re: Schedule glitch = a couple pimped out systainers
« Reply #5 on: February 16, 2019, 02:28 PM »
I used @joiner1970  's method of disconnecting the motor , cutting the roll cage and joining it back together with a smaller diameter pipe and rivets
Imho it's not only the cleanest way it's also the easiest
« Last Edit: February 16, 2019, 02:39 PM by Billy stray »
Billy

Offline ColossusX

  • Posts: 188
Re: Schedule glitch = a couple pimped out systainers
« Reply #6 on: February 16, 2019, 04:52 PM »
How the vibration in the systainer? I have a similar Makita compressor and have been debating putting it into a sys

Offline Billy stray

  • Posts: 317
Re: Schedule glitch = a couple pimped out systainers
« Reply #7 on: February 16, 2019, 06:05 PM »
With the rubber feet left on and a foam rubber Matt in the bottom I dont notice anything out of the ordinary
But I did make sure not to connect anything rigid from the compressor to the systainer
Let me know if that makita fits I was curious about that model..
Billy

Offline ColossusX

  • Posts: 188
Re: Schedule glitch = a couple pimped out systainers
« Reply #8 on: February 16, 2019, 07:51 PM »
It might be awhile.  I'm hesitant to cut it up.