Author Topic: Sys 1 Mini with Bosch Flexiclick  (Read 1844 times)

0 Members and 1 Guest are viewing this topic.

Offline Dick Mahany

  • Posts: 406
Sys 1 Mini with Bosch Flexiclick
« on: December 02, 2018, 06:07 PM »
I have a Sys 2 with the Bosch Flexiclick in foam and it has considerable extra room inside.  I know that the Flexiclick will pack well into a Sys 1, but wanted to see if it would fit into a Sys 1 Mini with all 4 attachments and a couple of batteries.  It looks like it will, but not in the Mini with the clear lid as the inner clear lid insert prevents the lid from closing.  The charger and a couple of batteries would also fit in a second one.

Probably no advantage to doing this, but I just needed to satisfy my curiosity.



« Last Edit: December 03, 2018, 08:44 AM by Dick Mahany »

Offline WoodworkTech

  • Posts: 130
    • My Personal Blog
Re: Sys 1 Mini with Bosch Flexiclick
« Reply #1 on: December 02, 2018, 07:35 PM »
Do you have pics of your sys2 Bosch Flexiclick setup?
Festool TS 55 REQ-F-PLUS
Festool OF 1400 EQ-F-PLUS
Festool CT MIDI HEPA
Festool Domino DF 500 Q-PLUS
Festool PRO 5 LTD (ETS 125 REQ)
Festool FS 1400/2 (x2)
Festool FS 1400/2-LR 32 Guide Rail
Festool LR32 Router Hole Drilling Set

Offline Dick Mahany

  • Posts: 406
Re: Sys 1 Mini with Bosch Flexiclick
« Reply #2 on: December 02, 2018, 07:55 PM »
Do you have pics of your sys2 Bosch Flexiclick setup?

@WoodworkTech Here's the Sys 2 setup.  It has room for another 12V drill or impact driver and possibly more items.  Mine has the attic lid and there are no internal height problems.  Hope this helps.


Offline WoodworkTech

  • Posts: 130
    • My Personal Blog
Re: Sys 1 Mini with Bosch Flexiclick
« Reply #3 on: December 02, 2018, 08:00 PM »
That helps.  What thickness foam did you use?
Festool TS 55 REQ-F-PLUS
Festool OF 1400 EQ-F-PLUS
Festool CT MIDI HEPA
Festool Domino DF 500 Q-PLUS
Festool PRO 5 LTD (ETS 125 REQ)
Festool FS 1400/2 (x2)
Festool FS 1400/2-LR 32 Guide Rail
Festool LR32 Router Hole Drilling Set

Offline Dick Mahany

  • Posts: 406
Re: Sys 1 Mini with Bosch Flexiclick
« Reply #4 on: December 02, 2018, 08:12 PM »
That helps.  What thickness foam did you use?

Fastcap Kaizen foam ~60mm thick.  I've had excellent luck with that material.

Offline KGB pilot125

  • Posts: 68
Re: Sys 1 Mini with Bosch Flexiclick
« Reply #5 on: December 18, 2018, 08:16 AM »
I just got the flex click, I think it is my first ever cordless bosch purchase.  I love it, fits my hand better than the Milwaukee m12 stuff. 
The M12 stuff rubs pretty bad and creates a "hot" spot on my hand in between my thumb and pointer finger. 
Thinking about pairing down the M12 stuff (to much and some redundant stuff) and replacing a few things with Bosch stuff.