Author Topic: SYS-HWZ Tool List  (Read 38853 times)

0 Members and 1 Guest are viewing this topic.

Offline shanesaw

  • Posts: 4
SYS-HWZ Tool List
« on: April 13, 2013, 01:01 PM »
I just bought the SYS-HWZ toolbox with tool organizer insert.  Included is a picture that explodes out all the tools this organizer was designed to accept.  I've been unable to locate a tool list with make and model of these tools.  Anyone out there have knowledge about this?  Thanks.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8377
  • Finger Lakes Region, NY State , USA
Re: SYS-HWZ Tool List
« Reply #1 on: April 13, 2013, 01:36 PM »
Hi,


Welcome to the FOG!  [smile]


Would you post a picture if the tools diagram?  I would like to see that.


Probably generic as far as branding  goes on the tools?  ???

Seth

Offline neeleman

  • Posts: 1187
Re: SYS-HWZ Tool List
« Reply #2 on: April 13, 2013, 01:46 PM »
I think it's the same poster as below which contains the following (mostly German) tools:
- Wiha screwdrivers
- Rali plane
- Bahco files
- ECE squares and mitre square
- Kirschen chisels (or MHG)
- Gedore hamer
- Knipex water pump plier
- Knipex pincer
« Last Edit: April 13, 2013, 01:51 PM by neeleman »
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline festoolviking

  • Posts: 361
Re: SYS-HWZ Tool List
« Reply #3 on: April 13, 2013, 02:21 PM »
Hi

The three black/orange coloured files looks like the  "Bahco" brand ones. I've got a few of them, really good quality.

http://www.bahco.com/english/

Festoolviking
Festoolviking

Offline bigjonh

  • Posts: 125
Re: SYS-HWZ Tool List
« Reply #4 on: April 13, 2013, 02:51 PM »
You can try to track all those tools down, but you also  can make it work with most hand tools you probably already have. I used it as is with the tools I had for a year or two, then I modified it pretty close to what I needed. Then I took it apart and used it as a pattern to make my own insert exactly how I want it with my tools that I use most. I use it pretty much every day.

Offline shanesaw

  • Posts: 4
Re: SYS-HWZ Tool List
« Reply #5 on: April 13, 2013, 06:15 PM »
Thanks, all.  It looks like they've actually selected some high quality tools for the slots, so I plan to look at their proposals and do a mix of their tools and mine.  I'm sure some modifications will ensue as well.  Fun to see which tools fit effectively. 

The photo you put up must be an older version.  Mostly the same, but a few differences. 

85244-0

Offline erock

  • Posts: 1254
Re: SYS-HWZ Tool List
« Reply #6 on: April 13, 2013, 06:40 PM »
Festool has a bevel gauge?????


or is the Festool logo photo shopped? 



Eric

Offline RL

  • Posts: 3038
Re: SYS-HWZ Tool List
« Reply #7 on: April 13, 2013, 06:46 PM »
Yes, it was a limited edition Europe-only thing that did the rounds a while ago. Nothing special.

Oops, my mistake. It's not a limited edition item. I just hadn't seen it for a while.
« Last Edit: April 13, 2013, 07:18 PM by RL »

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8377
  • Finger Lakes Region, NY State , USA
Re: SYS-HWZ Tool List
« Reply #8 on: April 13, 2013, 06:47 PM »
Festool has a bevel gauge?????


or is the Festool logo photo shopped? 



Eric


It's real, 491053



Seth

Offline Alex

  • Posts: 5654
Re: SYS-HWZ Tool List
« Reply #9 on: April 14, 2013, 05:47 AM »
For convenience:



The tools I can identify are:

Wera - screwdrivers
Knipex - all 3 pliers
Betts Tools - try square and similar looking 45 degree tool.
Sandvik - Saw with orange handle
Bahco -  3 viles
Kirschen - chisels
Festool - clamps, knife, bit set + handle, sanding block, drill bits, bevel gauge, measure stick,

Offline shanesaw

  • Posts: 4
Re: SYS-HWZ Tool List
« Reply #10 on: April 21, 2013, 11:50 PM »
A bit of a disappointing response from Festool on this question.  Initially, they offered up that it's simply a general purpose toolbox.  After pulling some teeth, I got this partial list of the Festools suggested in the photo:

495415 Festool Tape Measure

495966 Hand Sanding Block

489570 Clamps

496942 Wood Drill Set

495130 Brad Point Bits Set

495228 Centrotec Hand Driver

496936 Bit Storage Box

496390 Forstner-Style Bit Set

492772 Centotec Starter Set


Thanks to everyone else who provided a list of the tools.

Offline Alex

  • Posts: 5654
Re: SYS-HWZ Tool List
« Reply #11 on: April 22, 2013, 05:00 AM »
Why are you disappointed? Isn't it obvious that it is a general purpose insert and you can fill it as YOU wish. The picture Festool provides is only an example.

Offline shanesaw

  • Posts: 4
Re: SYS-HWZ Tool List
« Reply #12 on: April 25, 2013, 09:19 AM »
Great.  Thanks for all that info.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8377
  • Finger Lakes Region, NY State , USA
Re: SYS-HWZ Tool List
« Reply #13 on: April 25, 2013, 09:34 AM »
i was wrong, straight out the gate.

Those wihas DO exist.

There's 3 different soft finish deviants:

1. Standard  2. Heavy Duty (pictured) 3.  Extra Heavy Duty



If you are referring to the screwdrivers with the yellow and black handles, they are Wera.


Seth

Offline ScotF

  • Posts: 2449
Re: SYS-HWZ Tool List
« Reply #14 on: April 26, 2013, 01:22 AM »
Looks like Two-Cherries chisels also included in the set...

Scot

Offline jobsworth

  • Posts: 4969
  • Does Anyone Know What Time It Is?
Re: SYS-HWZ Tool List
« Reply #15 on: November 11, 2013, 02:31 PM »
Festool has a bevel gauge?????


or is the Festool logo photo shopped? 



Eric

Saw a couple of them at a tool store in London last week.

 Was tempted to get one. But it would of been for all show.

Offline festoolviking

  • Posts: 361
Re: SYS-HWZ Tool List
« Reply #16 on: November 13, 2013, 12:24 PM »
You should be able to get the bevel-gauge from any Festool-dealer. It's an accessory to the SYM-70 compund mitre saw:

http://www.festool.co.uk/Products/Accessories/Pages/Detail.aspx?pid=491053&name=Accessories-for-SYMMETRIC-mitre-saw-SYM-70-SM-SYM-70

A bit funny what they call it  [big grin]

Festoolviking
Festoolviking

Offline EV

  • Posts: 171
  • Reception Desk Installed in Riyadh, Saudi Arabia.
Re: SYS-HWZ Tool List
« Reply #17 on: March 21, 2015, 07:48 PM »
Junior hack saw with folding handle is great as I have bought one and it is available on german amazon, It is manufactured by connex.

http://www.amazon.de/Connex-Puk-Säge-verstellbarem-Griff-COX804020/dp/B001B4TNE8/ref=sr_1_2?ie=UTF8&qid=1426981203&sr=8-2&keywords=connex+säge

Regards

EV
--------------- " If you need to borrow a tool, means you need it, if you need it, go and BUY IT!!! " ---------------

Offline EV

  • Posts: 171
  • Reception Desk Installed in Riyadh, Saudi Arabia.
Re: SYS-HWZ Tool List
« Reply #18 on: March 21, 2015, 08:07 PM »
What is wrong with this Sliding bevel? I personally prefer it over traditional " Thumb screw / Knob " type as it does't get in the way. I bought one and it fits beatyfully.

http://www.amazon.co.uk/Bahco-9574-250-Aluminium-Sliding-BAH9574250/dp/B004EK25TQ/ref=sr_1_1?ie=UTF8&qid=1426981838&sr=8-1&keywords=bahco+sliding+bevel

This glue bottle is identical to the one pictured in the Systainer lid card. Bought mine from B&Q here in the uk and it fits lovely.
http://www.ebay.co.uk/itm/Unibond-No-More-Nails-Express-Clear-Wood-Glue-120g-Tube-/390229653338

Beside my glue bottle I have my trusty WERA ratchet screwdriver set to make up for some " unidentified " excessive space.
http://www.screwfix.com/p/wera-bit-ratchet-bit-check-set-31pcs/44291

I have a digital Stabila 300mm level but because of the digital housings it does not fit in the assigned slot so I keep my magnetic " boat " scaffolders level in there instead

I have also a Nobex OCTO square that slots in the assigned place but this required a little modification to the corners of the slot by using file.
http://www.clasohlson.com/uk/Nobex-Octo-Folding-Try-Square/Pr407413000

One of these to
http://www.clasohlson.com/uk/Cocraft-Cold-Chisel/40-7285

This hammer. Perfect fit. Bought it while in Italy last year for €19 for both ( PU has no place in the SYS-HWZ )
http://www.angloamericantools.com/tool_manufacturers/osca/machinist_hammers.html
http://www.angloamericantools.com/tool_manufacturers/osca/polyurethane_hammers.html

These are the more specialist tools that required for the Systainer insert, most other tools are readily available to buy or most will already have them.


Regards

EV
--------------- " If you need to borrow a tool, means you need it, if you need it, go and BUY IT!!! " ---------------

Offline Chippie D

  • Posts: 3
Re: SYS-HWZ Tool List
« Reply #19 on: September 30, 2017, 03:58 PM »
I just bought the SYS-HWZ toolbox with tool organizer insert.  Included is a picture that explodes out all the tools this organizer was designed to accept.  I've been unable to locate a tool list with make and model of these tools.  Anyone out there have knowledge about this?  Thanks.

Does anyone know what the tool is that looks like a hammer handle rapped in rope with what looks like a cold chisel tip ?

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8377
  • Finger Lakes Region, NY State , USA
Re: SYS-HWZ Tool List
« Reply #20 on: September 30, 2017, 08:58 PM »
I just bought the SYS-HWZ toolbox with tool organizer insert.  Included is a picture that explodes out all the tools this organizer was designed to accept.  I've been unable to locate a tool list with make and model of these tools.  Anyone out there have knowledge about this?  Thanks.

Does anyone know what the tool is that looks like a hammer handle rapped in rope with what looks like a cold chisel tip ?

Welcome to the forum!  [smile]

Handle for a Japanese saw.

Seth