Author Topic: SYS-Roll/Sortainer Portabiity  (Read 4129 times)

0 Members and 1 Guest are viewing this topic.

Offline Dundee99

  • Posts: 18
SYS-Roll/Sortainer Portabiity
« on: September 10, 2016, 03:36 AM »
Hi Greenies,

As seen in this link; the festool trolley is laid down on the bed of a Ute. this works without the tools inside the systainers being thrown around due to the foam inserts. HOWEVER, i am interested in the result of a SORTAINER having the same thing done, in short, can it? i know the sortainers dont have a smooth surface above the drawers and want to know if screws and small objects can fall into other drawer compartments.

Hope you can help, Thanks, D

Offline neeleman

  • Posts: 1199
Re: SYS-Roll/Sortainer Portabiity
« Reply #1 on: September 10, 2016, 04:36 AM »
Only the new T-Loc sortainer and sys-combi's do have flat tops above the drawers.
Until now only available with 3 drawers.
Don't try to lay down the old sortainers because all small content will get stuck, they will not fall in other drawers but the pieces are difficult to remove and the drawers are very hard to open.

« Last Edit: September 10, 2016, 04:47 AM by neeleman »
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16