Author Topic: Systainer 1.12  (Read 3993 times)

0 Members and 1 Guest are viewing this topic.

Offline KongKirill

  • Posts: 45
Systainer 1.12
« on: January 16, 2018, 06:00 PM »
Hi guys.
Just wantet to share with you a project I started on today. Code name "Systainer 1.12"
Material: cheapest 9mm spruce playwood
Progress: 5% done
To be continued  [embarassed]

« Last Edit: January 21, 2018, 05:10 PM by KongKirill »

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #1 on: January 19, 2018, 06:14 PM »
That didn't work out! 9mm spuce sucks  [big grin] I'll start all over again...

Offline TOOLTOWN

  • Festool Dealer
  • *
  • Posts: 502
    • tooltown.com
Re: Systainer 1.12
« Reply #2 on: January 19, 2018, 07:53 PM »
It was worth a shot.  Looked awesome while it lasted!

Ken

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #3 on: January 19, 2018, 09:41 PM »
HAHA, THANKS :)

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #4 on: January 21, 2018, 05:14 PM »
Hi again.
As I mentioned 9mm playwood sucks! I started allover again, this time with 12mm and slightly different approach. I think this will work. Systainer 1.12 is back!

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #5 on: January 26, 2018, 09:04 AM »
Hi guys!
I know there are millions of people sitting and pushing "F5" on their PC-computers, waiting for updates on my systainer 1.12!  [big grin] [big grin]
So here are some more pictures that illustrates the development  [embarassed]

Offline Mario Turcot

  • Posts: 606
Re: Systainer 1.12
« Reply #6 on: January 26, 2018, 09:29 AM »
 [eek] this is impressive. What are your planning to store in those Sys 2.12?
Mario

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #7 on: January 26, 2018, 03:44 PM »
Thank you, @Mario Turcot .
I really don't have any specific plan for that. I rarely do. Usually when I'm done with a build I just give it away and start on another. I do stuff in sake of making, not using :)
But this one I hope to keep and use stationary in my workshop. I could use it for some of my handtools.

Offline grobkuschelig

  • Posts: 439
Re: Systainer 1.12
« Reply #8 on: January 26, 2018, 04:31 PM »
I might offer myself, if you again feel the need to give it away. ;)

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #9 on: January 27, 2018, 07:02 PM »
Hi, everyone.
Here is today's update. Now I start to believe myself, that this one will be finished!  [thumbs up]
Btw, thanks to Brian Sedgeley of Festool USA for the tip on Instagram about how to use reference tip on narrow stock! Really helped me!
« Last Edit: January 27, 2018, 07:08 PM by KongKirill »

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #10 on: January 28, 2018, 04:48 PM »
Time for sanding.
I decided to split the last drawer in 2 10 cm deep and 5 I'll be making the shallow part again, god it damaged on the saw.
Next update will be the finished systainer.
The most difficult part of the work is really ahead... lock, handle - small pieces to route..

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #11 on: February 08, 2018, 05:24 PM »
Hi everybody.
Now it's close to finish. What's left is the big green thing in the front an a couple of layers of varnish. The sys 1.12 has been changed to 1.11 under way. The reason for that is that the lower drawer in sys 2 dimensions 157,5 mm  looked so out of proportions... So I cut it down to 105, sys 1 dim. I think it look may be not right, but "righter"  [big grin] [big grin]
This project got me some new ideas, so stay tuned for more systainer madness  [embarassed] [thumbs up]
Hope you find this amusing.

PS not everything went as planned. Because I can't measure...

Offline Picktool

  • Posts: 126
Re: Systainer 1.12
« Reply #12 on: February 08, 2018, 06:28 PM »

This project got me some new ideas, so stay tuned for more systainer madness  [embarassed] [thumbs up]
Hope you find this amusing.

@KongKirill  Here's an idea for all those systainers you're building.

Build a giant Systainer Armoire to keep all your systainers.  [eek] That would be madness.
Well Dogey

Offline Vondawg

  • Posts: 232
Re: Systainer 1.12
« Reply #13 on: February 08, 2018, 07:01 PM »
Yes.....amusing.....glad you have the time, to go thru, all you do
There are no mistakes....just new designs.

Offline KongKirill

  • Posts: 45
Re: Systainer 1.12
« Reply #14 on: February 08, 2018, 07:17 PM »
@Picktool darn, THAT WAS MY IDEA... All systainers and my self with T lock only on inside...