Author Topic: Systainer dividers  (Read 7087 times)

0 Members and 1 Guest are viewing this topic.

Offline Greg Powers

  • Posts: 2224
  • Metric convert
    • Stargate Unofficiial
Systainer dividers
« on: March 14, 2014, 07:25 PM »
Found these on the Woodcraft website (on sale and on clearance). They work great for storing Ro90 sandpaper in a Sys II. Much better access then the Festool stacking solution that is in a Sys I
Greg Powers
Size:XL

Offline P2P

  • Posts: 47
Re: Systainer dividers
« Reply #1 on: March 14, 2014, 07:44 PM »
Nice idea.  Do you have the Woodcraft part number?

Offline Greg Powers

  • Posts: 2224
  • Metric convert
    • Stargate Unofficiial
Re: Systainer dividers
« Reply #2 on: March 14, 2014, 08:14 PM »
Nice idea.  Do you have the Woodcraft part number?

For Sys III ---  158050 High Dividers

For Sys II ---- 158048 Low dividers
Greg Powers
Size:XL

Offline land_kel

  • Posts: 157
Re: Systainer dividers
« Reply #3 on: March 14, 2014, 11:09 PM »
So do I understand that I need 15 of these per Sys3 to make the setup shown in your post?
Lots of stuff

Offline Brice Burrell

  • Posts: 7265
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: Systainer dividers
« Reply #4 on: March 15, 2014, 08:45 AM »
So do I understand that I need 15 of these per Sys3 to make the setup shown in your post?

No, he is using eight in his set up and it looks like it's in a Sys 2.  Also, keep in mind these are $3 and $3.50 each piece, so Greg has $24 for the setup shown.  I think these aren't a bad deal, especially if you're like me and don't like making fiddly little projects like custom inserts.   
Check out my new blog, The Green and Dark Blue Blog.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8157
  • Finger Lakes Region, NY State , USA
Re: Systainer dividers
« Reply #5 on: March 15, 2014, 09:50 AM »
They work pretty well for set ups that don't require any exact spacing since you are limited to the increments on the dividers.  I have used then for several systainers. They can be cut if need be. They only stay in place by themselves if spanning the entire width / length with at least two parallel. However a few drops of super glue will hold them to the bottom in other situations.  The two heights can be used together.


102315-0




Seth

Offline Greg Powers

  • Posts: 2224
  • Metric convert
    • Stargate Unofficiial
Re: Systainer dividers
« Reply #6 on: March 15, 2014, 12:43 PM »
So do I understand that I need 15 of these per Sys3 to make the setup shown in your post?

No, only eight. But some trimming is required
Greg Powers
Size:XL

Offline Greg Powers

  • Posts: 2224
  • Metric convert
    • Stargate Unofficiial
Re: Systainer dividers
« Reply #7 on: March 15, 2014, 12:48 PM »
So do I understand that I need 15 of these per Sys3 to make the setup shown in your post?

No, he is using eight in his set up and it looks like it's in a Sys 2.  Also, keep in mind these are $3 and $3.50 each piece, so Greg has $24 for the setup shown.  I think these aren't a bad deal, especially if you're like me and don't like making fiddly little projects like custom inserts.  

I was lucky and got them on sale $2.65 and $2.25.  So the SYS II solution was 18 dollars.  
« Last Edit: March 15, 2014, 12:57 PM by GPowers »
Greg Powers
Size:XL

Offline wow

  • Inactive Member
  • *
  • Posts: 3579
  • Official WalMart greeter to the FOG
Re: Systainer dividers
« Reply #8 on: March 16, 2014, 03:37 AM »
Nice! Wish they had them in gray....
Trying to be one of the most helpful members on the FOG.

Offline Bhend18

  • Posts: 186
    • Hendricks Construction
Domino DF 500, CT 36 E, Boom Arm Set, CT MIDI, OF 1400, LR 32, FS 2424/2-LR 32, FS 1400/2 LR32, TS 55 REQ, TS 75 EQ, HKC 55 EB, FS 800, FS 1080, FS 1900, FS 3000, FSK 250, FSK 420, Parallel Guide Set, MFT/3, Kapex KS 120, Kapex UG, CXS, PDC 18/4, Drilling Dust Nozzle, CMS-GE, Carvex PS 420 EBQ, Pro 5 LTD,RO 90 DX, RO 150 FEQ, RTS 400 REQ, RS 2 E, LS 130 EQ, RAS 115 E, CT Wings, Vecturo OS 400, SysLite KAL-2, SYSRock

Offline Greg Powers

  • Posts: 2224
  • Metric convert
    • Stargate Unofficiial
Re: Systainer dividers
« Reply #10 on: March 16, 2014, 08:39 PM »
Also use these dividers for organizing 150 sandpaper in a Sys III.
Greg Powers
Size:XL

Offline fellaPC

  • Posts: 5
Re: Systainer dividers
« Reply #11 on: December 31, 2017, 07:29 PM »
wanted to dig this thread up... I see Woodcraft still has them in the dark gray color but any of you know where I can buy the light gray color... they appear to not be in stock on Amazon anymore. thanks