Author Topic: Systainer for T12 & TI15  (Read 15788 times)

0 Members and 1 Guest are viewing this topic.

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Systainer for T12 & TI15
« on: June 22, 2013, 10:11 PM »
I currently have a T12+3 set with depth stop chuck in a Classic sys2 with attic. I just picked up a TI15 in a Tloc sys1.

I would like to try to consolidate at get everything in one systainer, so a few questions...

Is the foam insert sold with the TI15 basic set available separately? It looks like this insert will fit three batteries, is this correct? Is there enough room to swap out the standard lid on the sys3 and add one with an attic to fit over the insert? Does the insert have space to fit the depth stop chuck?

Has anyone made up their own insert to hold both? I would love to fit it all into a sys2 and also get all four batteries in, but I'm not sure if it is possible.

Thanks
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline Brice Burrell

  • Posts: 7300
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: Systainer for T12 & TI15
« Reply #1 on: June 22, 2013, 10:17 PM »
I think Shane mentioned the insert is available.  It does have space for the depth stop chuck and three batteries, one in each tool and a slot for one extra.  Here are a few pics of the insert.  You'll be the test case to see in the attic lid fits or not. 

88999-0
89001-1
Check out my new blog, The Green and Dark Blue Blog.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 8297
  • Finger Lakes Region, NY State , USA
Re: Systainer for T12 & TI15
« Reply #2 on: June 22, 2013, 10:47 PM »
It appears from Brice's picture that nothing sticks up higher than the Systainer sides. So an attic should fit.

Does the third battery stand on end  at the right edge?


Seth

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Systainer for T12 & TI15
« Reply #3 on: June 23, 2013, 07:30 AM »
It appears from Brice's picture that nothing sticks up higher than the Systainer sides. So an attic should fit.

Does the third battery stand on end  at the right edge?


Seth

I believe the battery sits in the slot at the top left, at least that's what it looks like in some of the other pictures I have seen.

Thanks for the additional pictures Brice, it helps to see all of the chucks in their spots.

Do dealers have access to the insert or should I just call Festool directly?
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline Brice Burrell

  • Posts: 7300
  • Remodeling Contractor
    • The Green and Dark Blue blog
Re: Systainer for T12 & TI15
« Reply #4 on: June 23, 2013, 07:54 AM »
Top left is where the extra battery fits, where I have the cord for the charger.

I'm pretty sure the insert is considered a "spare part" so dealers won't stock it.  For spare parts Festool sells direct to end user.  Some dealers will order "spare parts" items for you.  I'll add this, I don't think spare parts are sold wholesale to dealers so they lose their time for no compensation ordering on your behalf.  I'd suggest you make it worth their while if you go that route.     
Check out my new blog, The Green and Dark Blue Blog.

Offline neeleman

  • Posts: 1186
Re: Systainer for T12 & TI15
« Reply #5 on: June 23, 2013, 09:10 AM »
The insert for the TI 15 Basic SYS 3 systainer has number 703202.

The same go's for the SYS 3 insert for the T18 screwdriver and PS420 jigsaw compact assembly kit.
This one has number 703317.

Both numbers are not yet present in the EKAT catalogue.

The empty systainers with the insert for both sets are not sold separately.

At least that's what my German dealer has told me a few months ago.
« Last Edit: June 23, 2013, 09:51 AM by neeleman »
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Systainer for T12 & TI15
« Reply #6 on: June 23, 2013, 09:28 AM »
Thanks for the numbers.

I have an empty Tloc sys3 right now so the insert would be all I need. And the attic lid if I decide to try it. [wink]
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline tjacks66

  • Posts: 72
  • Snake Pilot
Re: Systainer for T12 & TI15
« Reply #7 on: July 29, 2013, 06:55 AM »
I'm a little confused by neeleman's statement - I want to buy a Systainer 3 with the the insert for the TI 15 i already own so I can add a C15 to it, is the insert not sold as a spare part?
Kapex KS 120, CT 26 Dust Extractor, Rotex 90DX, Ti 15 Hybrid Impact Cordless Drill/Driver, T15 +3 Drill

Offline neeleman

  • Posts: 1186
Re: Systainer for T12 & TI15
« Reply #8 on: July 29, 2013, 07:11 AM »
It's simple.
Only the insert is sold separately. You have to add an empty SYS 3 yourself.
The SYS 3 with the insert is only sold including the machine and is called TI 15 Basic.
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline tjacks66

  • Posts: 72
  • Snake Pilot
Re: Systainer for T12 & TI15
« Reply #9 on: July 29, 2013, 01:49 PM »
So I buy both an empty Sys 3 and the insert separately - got it.

Thanks
Kapex KS 120, CT 26 Dust Extractor, Rotex 90DX, Ti 15 Hybrid Impact Cordless Drill/Driver, T15 +3 Drill

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Systainer for T12 & TI15
« Reply #10 on: August 12, 2013, 09:30 PM »
I finally got time to make this happen. I decided to make my own insert with foam so I could add space for a few boxes with bits and fit a fourth battery.
91085-0
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Re: Systainer for T12 & TI15
« Reply #11 on: August 13, 2013, 12:20 AM »
Sweet!!

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Systainer for T12 & TI15
« Reply #12 on: September 18, 2013, 08:09 PM »
Update [smile]

I finally picked up a sys 2 with an attic and swapped the lid on to this systainer. It fits perfect!
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline 3PedalMINI

  • Posts: 428
    • Signature Sound & Video
Re: Systainer for T12 & TI15
« Reply #13 on: September 19, 2013, 11:10 AM »
Whoa! nice!

did you manage to fit that in a sys 3 or 2?
The Bitterness of poor quality remains long after the sweetness of low price is forgotten -Benjamin Franklin

Professional Custom Audio Video System Designer/Installer serving Southern - Middle NJ, Eastern PA & the Surrounding Shore Points.
www.sigsv.com

Kapex 120,TS55,RO150,ETS125,CT-26,CT-MIDI,Tradesmen Cleaning Kit, Festool Ratchet Kit, Sys-lite, Sys Roll Cart, T18 +3, 2013 Centrotec Kit, Carvex 420, Carvex Accessory Kit, CXS,RO90, TI15 and Various Festool Systainers

Offline Bikeboy80

  • Posts: 467
    • Drumm Design Remodel
Re: Systainer for T12 & TI15
« Reply #14 on: September 19, 2013, 01:02 PM »
Whoa! nice!

did you manage to fit that in a sys 3 or 2?

A sys 3
The Green Koolaid sure is sweet...

Kapex w/crown stops, Domino DF 500 Set, Syslites, PS300, RTS400, RO150, OF1010 w/LR32 Kit, TS75, 75" + (2) 55" rails, RO90, ETS125, RAS, Custom abrasive systainer, CTmini, CT36AC w/blastgates, PLANEX w/harness, TI15, T12+3 set, MFT/3 cross cut, Universal Cleaning set, Turbo Suction Brush, 12 drawer Sortainer, Extra Systainers with job specific tool collections

Drumm Design Remodel

Offline Staniam

  • Posts: 689
  • Enjoy what you do. Build something.
Re: Systainer for T12 & TI15
« Reply #15 on: December 10, 2014, 04:57 PM »
Does anyone know if the insert from the Ti15 Basic will fit in a Tanos Sys-3?
LA Lakers - Oakland Athletics
The Arsenal: Festool - PDC, CXS, RO 125, TS55 REQ, OF 1010 EQ, CT MIDI;  Bosch - JS572EBL, JS120, 1294VSK, PS22

Offline neeleman

  • Posts: 1186
Re: Systainer for T12 & TI15
« Reply #16 on: December 10, 2014, 05:28 PM »
Yes why not, read the posts.
BTW. The item number is 703202.
Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | DTS400 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline elfick

  • Posts: 489
Re: Systainer for T12 & TI15
« Reply #17 on: December 11, 2014, 08:57 AM »
Does anyone know if the insert from the Ti15 Basic will fit in a Tanos Sys-3?
The Tanos and Festool systainers are identical except for color and the embossed branding on the lid.

Offline JUDOKA

  • Posts: 73
Re: Systainer for T12 & TI15
« Reply #18 on: January 16, 2016, 08:25 PM »
Hi is this foam insert (703202) still available for purchase?

Offline bub254

  • Posts: 60
Re: Systainer for T12 & TI15
« Reply #19 on: January 16, 2016, 08:29 PM »
I couldn't find them when I did an internet search but my local dealer ordered one for me and it came in a few days.  Like $15 US

Offline JUDOKA

  • Posts: 73
Re: Systainer for T12 & TI15
« Reply #20 on: January 17, 2016, 02:43 PM »
Thanks bub254 .