Author Topic: Will these inserts fill a Sys1?  (Read 5234 times)

0 Members and 1 Guest are viewing this topic.

Offline DiscoStu

  • Posts: 153
Will these inserts fill a Sys1?
« on: March 08, 2016, 04:22 AM »
Looking to get a Festool Systainer for screws. I have previously seen an option with coloured containers but this seems to have gone? I saw this on FFX & Nuts and Bolts:



Festool Plastic containers Set 60x60/120x71 3xFT
Festool part number: 201124

Will this fit and fill a Sys1? I don't want them flying about! I did wonder if they were more designed for sortainers?




Offline Bert Vanderveen

  • Posts: 456
Re: Will these inserts fill a Sys1?
« Reply #1 on: March 08, 2016, 05:26 AM »
They are intended for use in the new sortainers and the 'workmanstyle toolbox' (the one with the handle). I just tried ’m in a Sys1 and there’s no fun there: loose, bad fit — you would have to use them with a bottom filler and side fillers to keep them steady.
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 Mk2 · MFT/3 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 EQ · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · Kapex KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE … | Mirka 1230L P&C | Hammer A3 31 Silent Power · Hammer N4400 

Offline DiscoStu

  • Posts: 153
Re: Will these inserts fill a Sys1?
« Reply #2 on: March 08, 2016, 05:52 AM »
Thanks - really helpful. I'll look for the traditional systainer with the inserts.


Offline neeleman

  • Posts: 1189
Re: Will these inserts fill a Sys1?
« Reply #3 on: March 08, 2016, 07:53 AM »
The insert alone (Festool 498043) and also together with coloured boxes (Tanos 80500038) are also sold separately.
Just put them in your own empty SYS 1.

Festoolian since 1998.
FESTOOL:
SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | CTL MIDI | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Billy stray

  • Posts: 306
Re: Will these inserts fill a Sys1?
« Reply #4 on: March 10, 2016, 10:48 AM »
When I set this up I felt like I wanted more blue boxes and less yellow bur when I looked them up to buy 3 separate it was almost as expensive as buying a whole entire set up, wich is what I will end up doing, then I'll have spares
Billy

Online Gregor

  • Posts: 956
Re: Will these inserts fill a Sys1?
« Reply #5 on: March 12, 2016, 03:51 PM »
I must say that it was a disappointing realization that the old (colored) and new (grey) boxes are incompatible.

Wouldn't have been necessary, with a slighly different geometry of the separators in the drawers of the new Sortainers the old boxes would have worked nicely with them.

Offline bryan1982

  • Posts: 128
Re: Will these inserts fill a Sys1?
« Reply #6 on: March 12, 2016, 11:11 PM »
240066-0

They fit finein the sys combi and will not fall over
I have been using it for the past week and love it

You cant get the the boxes at the back row but thats no big deal for me as i put the screws i dont use very often their.

« Last Edit: March 12, 2016, 11:14 PM by bryan1982 »

Offline bryan1982

  • Posts: 128
Re: Will these inserts fill a Sys1?
« Reply #7 on: March 12, 2016, 11:14 PM »
Pic

Offline Whichbit

  • Posts: 3
Re: Will these inserts fill a Sys1?
« Reply #8 on: March 13, 2016, 11:09 PM »
I have the 3 sizes in grey, but the coloured bins fit ok. About 98% ok.

Online Gregor

  • Posts: 956
Re: Will these inserts fill a Sys1?
« Reply #9 on: April 18, 2016, 05:58 AM »
I tried it in a configuration where I only used one side for the old style boxes, this didn't work that good since they tilt at times (from the notches in the bottom).

Offline Steveo205

  • Posts: 41
Re: Will these inserts fill a Sys1?
« Reply #10 on: April 18, 2016, 06:25 PM »
Eh! What do you mean they have been discontinued... They are still available. Look here:

https://www.festool.co.uk/Products/Accessories/Pages/Detail.aspx?pid=498043&name=accessories-for-systainer-t-loc-box-tze-sys-1-tl