Author Topic: 1010  (Read 4074 times)

0 Members and 1 Guest are viewing this topic.

Offline Gjarman12

  • Posts: 94
1010
« on: June 08, 2015, 02:01 PM »
I'm thinking about buying the 1010 for handheld use. My immediate uses will be some dados in mdf and hardwood, some trim work on a wall (well a Murphy bed) using the guide rail (I have the guide rail already), some rabbets on a circle and maybe a custom MFT top (will need the right bit for that though). Ultimately I think I'll get the ls32 for making cabinets, but I want to know if I'll be able to do these tasks (not the cabinets) with the equipment that comes in the systainer. I have a bunch of cheap 1/4 router bits already.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Jesse Cloud

  • Posts: 1717
  • Festooling at the end of a dirt road in New Mexico
Re: 1010
« Reply #1 on: June 08, 2015, 03:47 PM »
Which accessories come with the tool varies significantly from country to country.  You might want to direct your question to your distributor.  If you are dealing with Lee Valley, I'm sure you could get a good answer.

I presume you have a vac to fit on the router.  You will definitely need dust extraction.



Offline Gjarman12

  • Posts: 94
Re: 1010
« Reply #2 on: June 08, 2015, 04:01 PM »
Yes, I do have a vacuum. Lee Valley's site does include the rail stop guide, what purpose does it serve?
« Last Edit: June 08, 2015, 04:36 PM by Gjarman12 »

Offline Tom Bellemare

  • Inactive Member
  • *
  • Posts: 5148
  • Festool demo's & personal service in Central Texas
    • Tool Home LLC
Re: 1010
« Reply #3 on: June 08, 2015, 04:12 PM »
The Guide Stop allows one to run a straight line relative to the guide rail placement. While using stops on the guide rail, it can also make it easy to create stopped dado or similar stopped features that are repeatable.

The OF 1010, as sold here, comes with the guide stop but not the Fine Adjuster, which is quite useful.


Tom
Tom Bellemare
Customer Svc
Tool Home LLC
www.tool-home.com
512-428-9140

Offline blaszcsj

  • Posts: 359
  • I like building stuff with my hands.
Re: 1010
« Reply #4 on: June 12, 2015, 02:24 PM »
It comes with everything you need to do datos. You just need the edge guide and fine adjuster if you dont want to used the guide.

Either way. the 1010 has become my favorite router. It is amazingly powerful for it package size and it is super well balanced. I too will be getting the lr 32 for making cabinet holes.

hope this helps.
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TSC55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII | Syslite STL 450 | RAS 115 E

Offline cliffp

  • Posts: 514
Re: 1010
« Reply #5 on: June 12, 2015, 02:36 PM »
I just used the 1010 for trimming edge banding with the base that allows it to be used horizontally and other related parts and it was GREAT. I know that this is only one small part of its repertoire of functionality but it was one of the main justifications for me to buy it.
T15+3 set, CXS set, Centrotec set (2011), TS55REBQ, TS75EQ, 1400 rail, 1900 rail, 1400 LR32 rail, LR32 set, MFT/3, OF1400, OF1010, Guide rail adapter, edging plate, angle arm, chip catcher, small bore base, MFS400, MFS1000 profiles, RO90DX, RO150, ETS150/3, Domino DF500, Domino assortment systainer, CTL Midi, compact cleaning set, CMS GE, TS75 Module, OF Module, VL and VB extensions, LA Stopper, Sliding table, Carvex 420 Li 18 GG, core maker set, EHL65EQ, Syslite.

Offline ear3

  • Posts: 3590
Re: 1010
« Reply #6 on: June 14, 2015, 11:39 AM »
+1

No more accidentally rocking my trim router while riding along the edge.

I just used the 1010 for trimming edge banding with the base that allows it to be used horizontally and other related parts and it was GREAT. I know that this is only one small part of its repertoire of functionality but it was one of the main justifications for me to buy it.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline Gjarman12

  • Posts: 94
Re: 1010
« Reply #7 on: June 14, 2015, 12:41 PM »
Thanks. I bought the router yesterday and it seems great so far. Is this the edge guide?

Offline Don T

  • Posts: 1809
  • Phoenix, Az
Re: 1010
« Reply #8 on: June 14, 2015, 01:04 PM »
Yes it is.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Online mike_aa

  • Posts: 1041
Re: 1010
« Reply #9 on: June 14, 2015, 04:12 PM »
I just used the 1010 for trimming edge banding with the base that allows it to be used horizontally and other related parts and it was GREAT. I know that this is only one small part of its repertoire of functionality but it was one of the main justifications for me to buy it.
Thanks. I bought the router yesterday and it seems great so far. Is this the edge guide?
@Gjarman12
Correct me if I'm wrong, but I understood him to say that he used the edging plate with the angle arm.

Like in this video:
« Last Edit: June 14, 2015, 04:15 PM by mike_aa »

Offline cliffp

  • Posts: 514
Re: 1010
« Reply #10 on: June 14, 2015, 04:46 PM »
as mike_aa says, I was referring to the edging plate as shown in the video.

Cliff
T15+3 set, CXS set, Centrotec set (2011), TS55REBQ, TS75EQ, 1400 rail, 1900 rail, 1400 LR32 rail, LR32 set, MFT/3, OF1400, OF1010, Guide rail adapter, edging plate, angle arm, chip catcher, small bore base, MFS400, MFS1000 profiles, RO90DX, RO150, ETS150/3, Domino DF500, Domino assortment systainer, CTL Midi, compact cleaning set, CMS GE, TS75 Module, OF Module, VL and VB extensions, LA Stopper, Sliding table, Carvex 420 Li 18 GG, core maker set, EHL65EQ, Syslite.

Offline ScotF

  • Posts: 2477
Re: 1010
« Reply #11 on: June 14, 2015, 06:33 PM »
I just used the 1010 for trimming edge banding with the base that allows it to be used horizontally and other related parts and it was GREAT. I know that this is only one small part of its repertoire of functionality but it was one of the main justifications for me to buy it.

Just used this yesterday in this application trimming edging on a cabinet I am making. Worked great. I thought about getting the MFK700, but this worked really well and so no real need. So versatile of a router.