Tomfoolery
 Offline
Location: Near Orlando, FL USA Member Since: Apr 2012
Posts: 11
|
 |
« on: April 30, 2012, 10:14 AM » |
|
What is the best way to rip boards that end up being not wide enought to span the distance between the blade on the saw and the undermount clamp on the guiderails?
What i have been doing is finding a scrap that is the same thickness and placing it next to the board I am ripping to try and keep the guide level for the cut.
Any other suggestions or better ideas?
Thank you!
|
|
|
|
|
Logged
|
|
|
|
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.
|
|
barnowl
Offline
Location: Massachusetts Member Since: Feb 2008
Posts: 118
|
 |
« Reply #1 on: April 30, 2012, 10:27 AM » |
|
That's what I do, so I'd be interested in other suggestions as well.
|
|
|
|
|
Logged
|
best wishes,
Steve
TS-55, assorted rails, Domino, Kapex, OF1400, ETS 125 EQ, RO 125 FEQ, RO 90, PSB 300 EQ, CT-22, CT-26, MFT-3
|
|
|
Knottys
Offline
Location: Toronto Member Since: Nov 2011
Posts: 34
|
|
« Reply #2 on: April 30, 2012, 12:40 PM » |
|
I believe thats what most of us do however this topic was brought up not so long ago and someone actually made an adjustable leg that slides into the track slot. If im not mistaken he made it out of that metamorphosis plastic stuff.
Maybe someone can find the tread for you
K.
|
|
|
|
|
Logged
|
|
|
|
Robert
Offline
Location: Southeast Ga. USA Member Since: Nov 2010
Posts: 23
|
|
« Reply #3 on: April 30, 2012, 01:16 PM » |
|
I think Seneca Woodworking is in the process of offering a guide rail accessory that might solve your problem. Cant give you the link but its somewhere on the forum.  |
|
|
|
|
Logged
|
|
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2115
|
|
« Reply #4 on: May 01, 2012, 11:55 AM » |
|
I made a 1 minute video to show how I do it.
|
|
|
|
|
Logged
|
I like green.
|
|
|
barnowl
Offline
Location: Massachusetts Member Since: Feb 2008
Posts: 118
|
|
« Reply #5 on: May 01, 2012, 12:48 PM » |
|
That's a good system Richard.
While I don't have an MFT, it gives me some ideas.
Thanks.
|
|
|
|
|
Logged
|
best wishes,
Steve
TS-55, assorted rails, Domino, Kapex, OF1400, ETS 125 EQ, RO 125 FEQ, RO 90, PSB 300 EQ, CT-22, CT-26, MFT-3
|
|
|
Robert
Offline
Location: Southeast Ga. USA Member Since: Nov 2010
Posts: 23
|
|
« Reply #6 on: May 01, 2012, 01:08 PM » |
|
Richard, Never thought about clamping a piece under the guide rail. But then again Im a beginner.Nice video. Clear and concise.
|
|
|
|
|
Logged
|
|
|
|
hockey_magnet
Offline
Location: Canada Member Since: Nov 2011
Posts: 305
|
|
« Reply #7 on: May 01, 2012, 01:46 PM » |
|
Richard, that's what I would call a well used MFT  |
|
|
|
|
Logged
|
|
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2115
|
|
« Reply #8 on: May 01, 2012, 04:58 PM » |
|
Richard, that's what I would call a well used MFT Yes, it may well be time to play the B-side! |
|
|
|
|
Logged
|
I like green.
|
|
|
noelnyman
Offline
Location: UNITED STATES (US) Member Since: Nov 2007
Posts: 3
|
|
« Reply #9 on: May 04, 2012, 06:14 PM » |
|
Cool idea! For use with the MFT, you could skip the clamps by attaching the wood strip to the underside of the rail with two QWAS Rail Dogs, replacing the stock bolts with 1/4-20's long enough to reach through the wood strip to the dogs. The stock bolts have square heads, but the hex heads on bolts in my misc 1/4-20 bolt collection seemed to work just fine. |
|
|
|
|
Logged
|
|
|
|
ScotF
 Online
Location: Southern Orange County, CA, USA Member Since: Jul 2009
Posts: 1355
|
|
« Reply #10 on: May 06, 2012, 12:57 AM » |
|
Richard, that's what I would call a well used MFT Yes, it may well be time to play the B-side! Richard -- great idea! Thanks for posting. Are you still on the first side of your top or have you replaced the entire thing before? Looks like one of Kreg's  ! Scot |
|
|
|
|
Logged
|
|
|
|
RL
Offline
Location: Canada Member Since: Feb 2010
Posts: 2115
|
|
« Reply #11 on: May 06, 2012, 05:55 AM » |
|
Still on the first side! Gonna rotate it soon!
|
|
|
|
|
Logged
|
I like green.
|
|
|
|
