Author Topic: Another Domino selection question  (Read 1081 times)

0 Members and 1 Guest are viewing this topic.

Offline EitanS

  • Posts: 16
Another Domino selection question
« on: April 12, 2015, 11:28 PM »
Rather, Domino orientation. Building a simple bench, 2 layers of 3/4" play laminated, legs, and 3x1/5" stretcher.
Planning to attach stretcher to legs with 2 10x50s to prevent sag and racking. I have three questions about best want to do this.
a) Vertical or horizontal orientation?

b) If vertical, best to align with pencil marks? Piece is too narrow to use the tabs. If horizontal, I believer 2 fence settings is simple, or using a spacer.
c) This is my first time with mid-panel dominos. I still can't visualize the best way to transfer locations to the legs. Tight setting on stretcher and loose on legs?

I followed all the instructions for attaching the images, hope this works!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline tjbnwi

  • Posts: 5894
  • Cedar Tucky Indiana
Re: Another Domino selection question
« Reply #1 on: April 13, 2015, 12:01 AM »
3"x1.5" stretcher? 


Draw the stretcher on the leg, mark the Domino locations, use a board to align the Domino using the base as your reference faced. The offset is 10 mm.

99% of my work is tight/tight. I your case go tight stretcher, loose leg.