Author Topic: Bevel Range on Track Saws  (Read 1008 times)

0 Members and 1 Guest are viewing this topic.

Offline TrackPack83

  • Posts: 4
Bevel Range on Track Saws
« on: July 31, 2017, 11:17 AM »
Hey All,

Anyone know why most all track saws have a -1 degree to 47 degree bevel range?  When do you find yourselves using -1 or 46/47?  I'm racking my brain and can't come up with why the extended range beyond 0 to 45. 

Thanks,
Casey

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ear3

  • Posts: 3190
Re: Bevel Range on Track Saws
« Reply #1 on: August 03, 2017, 07:26 AM »
I've used 46-47 a few times to finesse a corner mitre, and the -1 to ensure extra clearance on some door bottoms.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline aloysius

  • Posts: 139
Re: Bevel Range on Track Saws
« Reply #2 on: August 03, 2017, 09:55 AM »
That tiny bevel on an exterior door bottom is almost as effective as a drip groove.
FOG-wit since '95:  Some say since birth...

Offline demographic

  • Posts: 307
Re: Bevel Range on Track Saws
« Reply #3 on: August 03, 2017, 02:49 PM »
Not all corners you fit things to are perfectly square, few extra degrees help a lot with this.

Offline RDMuller

  • Festool Dealer
  • *
  • Posts: 244
Re: Bevel Range on Track Saws
« Reply #4 on: August 04, 2017, 09:52 PM »
Great for things like a bevel miter on a chest like item.  That extra degree can assure no gap along the visible edge where the pieces join.  Clamp your rail on both ends if you are looking for this kind of precision.  If there is any gap, it will be on the "inside", hidden away.  Big advantage of this joint is no visible end grain if using plywood, mdf, etc.

Offline Retired Chippy

  • Posts: 23
Re: Bevel Range on Track Saws
« Reply #5 on: August 05, 2017, 02:03 PM »
Besides the previously mentioned benefits, back beveling things like cabinet fillers helps to keep a tight, crisp looking edge at a vertical wall surface.  If there are imperfections in the drywall, a sharp back beveled edge to a filler piece can be buried into the drywall for a nice tight fit.
Wallflower and information sponge