Author Topic: Carvex PSBC 420 EB Blade popping in front of the guide  (Read 492 times)

0 Members and 1 Guest are viewing this topic.

Offline imranindiana

  • Posts: 3
Carvex PSBC 420 EB Blade popping in front of the guide
« on: November 24, 2018, 01:08 PM »
I am cutting metal for the first time, it is very thin. For some reason the blade jumps forward and does rest on the roller. The blade guide is adjusted properly. The blade is deflecting to the right so does the cut line. There is a good amount of front and back movement in the blade holder and the shaft, is this normal?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.