Author Topic: Domino 500 plate to center  (Read 827 times)

0 Members and 1 Guest are viewing this topic.

Offline Gene Davis

  • Posts: 90
Domino 500 plate to center
« on: July 16, 2018, 08:39 AM »
Mine is 1500 miles away and I'm asked by a friend.

When flat on bench, what is the distance from surface up to C/L of cutter?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Cheese

  • Posts: 4946
Re: Domino 500 plate to center
« Reply #1 on: July 16, 2018, 09:49 AM »
If I understand your question correctly, it should be 10mm.
« Last Edit: July 16, 2018, 10:16 AM by Cheese »

Offline DanMcDan

  • Posts: 13
Re: Domino 500 plate to center
« Reply #2 on: July 18, 2018, 07:54 AM »
10mm

Offline jobsworth

  • Posts: 5242
  • Does Anyone Know What Time It Is?
Re: Domino 500 plate to center
« Reply #3 on: July 19, 2018, 12:21 PM »
I think Sedge has one of his instagram tips talking about that

Offline Joe Gregory

  • Posts: 2
Re: Domino 500 plate to center
« Reply #4 on: July 19, 2018, 12:42 PM »
Yes, 10 MM as pointed out by Sedge in one of his "I Hope it Helps" Instagrams...

I looked in the manuals Festool and the Supplement, no mentioned it, thinking of putting paint on it for reference, Festool Green would be a nice touch.

Purchased the "Imperial" replacement Thickness Gage from Seneca Tool works for 4 MM Dominos in 1/2" plywood, works great.

Joe

Offline GoingMyWay

  • Posts: 619
Re: Domino 500 plate to center
« Reply #5 on: July 19, 2018, 01:07 PM »
I believe this is the Instagram post that's being referenced: https://www.instagram.com/p/Bj-bBwUHEOA/?taken-by=festoolsedge.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS