« previous next »
Pages: [1]   Go Down

Author Topic: Hose question. Am I missing something?  (Read 1321 times)

0 Members and 1 Guest are viewing this topic.

Offline KGB pilot125

  • Posts: 65
Hose question. Am I missing something?
« on: April 09, 2018, 04:27 PM »
Is there an adapter I can use to connect one hose to another?

I have this Festool 493047 Hose Sleeve but it needs to have a different end (the vac end) for them to connect to each other.

Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline mwildt

  • Posts: 420
Re: Hose question. Am I missing something?
« Reply #1 on: April 09, 2018, 04:40 PM »
You need another vac end so one hose is vac-vac + the connector you listed. OR use the new connectors. Sledge (Festool) indicated that to be possible with the new connectors. OR tape them together using masking tape.
Logged

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10452
    • The Tool Nut's Festool Store
Re: Hose question. Am I missing something?
« Reply #2 on: April 09, 2018, 04:44 PM »
See attachment.

FYI, the new braided sleeve hoses will join together without any voodoo or extra bits.
Logged
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service - No Sales Tax Collected (Outside NY/VA/KY)
Toolnut.com and FestoolProducts.com

Offline KGB pilot125

  • Posts: 65
Re: Hose question. Am I missing something?
« Reply #3 on: April 09, 2018, 05:18 PM »
Ok thanks guys. 

Thats what I am doing now, I have a D36 with Vac----Vac-Adapter-Vac----Toolend that I also swap a D27 hose onto. 

I just assumed [wink] that because Festool is German there would be a more efficient way of doing it!
Logged

Offline rst

  • Posts: 1946
Re: Hose question. Am I missing something?
« Reply #4 on: April 09, 2018, 05:25 PM »
I bought the sleeved hose with cord when they came out, replaced the vac end with a tool end, plug that into my 36mm hose, use an extension cord to connect the plugin.  Voila...long hose with minimal pressure drop.
Logged
Pages: [1]   Go Up
« previous next »