Woodworking & Power Tools Forum - Festool Owners Group > FESTOOL DISCUSSIONS > Festool How To... > how do you remove t-loc top
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: how do you remove t-loc top  (Read 1845 times)
0 Members and 1 Guest are viewing this topic.
redbird

Offline Offline

Location: UNITED STATES (US)
Member Since: Jun 2007
Posts: 51
« on: May 12, 2011, 06:43 PM »
I have searched here on FOG trying to lear how to remove the top on a T-loc systainer.  I am looking to put a Dust Deputy in one on top of my CT26.

Anyone familiar with how to remove the top?
Logged
shirt size: XXL
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Corwin

Offline Offline

Location: Washington State, USA
Member Since: Jan 2007
Posts: 1991
« Reply #1 on: May 12, 2011, 07:00 PM »
Here's a link to a thread that Seth wrote about removing the top of the older Classic Systainers.  I don't have any of the new T-Locs, so I am not sure if this is the same or not...

tF:  Hinge Pin Removal
Logged
Shirt Size:  L
redbird

Offline Offline

Location: UNITED STATES (US)
Member Since: Jun 2007
Posts: 51
« Reply #2 on: May 12, 2011, 08:14 PM »
I don't think they are set up the same. I looked at the thread linked and my best recollection (the systainers are at the shop in town) is that they are different.
Logged
shirt size: XXL
SRSemenza
Global Moderator

Offline Offline

Location: UNITED STATES (US)
Member Since: Jun 2007
Posts: 3996


Finger Lakes Region, NY State , USA
« Reply #3 on: May 12, 2011, 08:43 PM »
Sorry can't help, at least not today. My only T-Loc is several miles away at present.


Seth
Logged
Seth R. Semenza
 
S. R. Semenza Woodworking


Festool Service 800-554-8741
Brice Burrell

Offline Offline

Location: Pittsburgh, PA, USA
Member Since: Mar 2007
Posts: 6191


Remodeling Contractor


WWW
« Reply #4 on: May 12, 2011, 09:30 PM »
The T-Loc looks like you just need to drive the pins out. 
Logged
Check out my new blog, The Green and Dark Blue Blog.
Tom Bellemare
Festool Dealer

Offline Offline

Location: Austin, Texas - USA
Member Since: Nov 2007
Posts: 3557


Festool demo's & personal service in Central Texas


WWW
« Reply #5 on: May 12, 2011, 11:09 PM »
It looks like basically the same procedure as the classics to me...

If the reinforcement bar is in the back, it covers up the ends of the hinge pins. If so, you have to grab the pin through a small cavity to get it started. Then grab the head with something and pry it out the remainder.

If the reinforcement bar is not in the back you just pop the inside of the hinge pin to get it started.


Tom
Logged
Tom Bellemare
Customer Svc
Tool Home
www.tool-home.com
512-428-9140
redbird

Offline Offline

Location: UNITED STATES (US)
Member Since: Jun 2007
Posts: 51
« Reply #6 on: May 13, 2011, 07:04 AM »
Will give it a try today...Thanks.  I will take a few pictures of the process along the way and if(?) successful will post them here.

Gary
« Last Edit: May 13, 2011, 07:07 AM by redbird » Logged
shirt size: XXL
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to: