Author Topic: I-socket screw up my ts75?  (Read 351 times)

0 Members and 1 Guest are viewing this topic.

Offline mikewaters

  • Posts: 15
I-socket screw up my ts75?
« on: October 05, 2017, 01:40 PM »
I searched on forums first, nothing answered my question:

I have an I-socket autoswitch #is110M
Will hooking my ts75 along with my ridged vacuum mess with my ts75?
I read about extension cords messing with the ts75, so thought I'd ask here first before I plug in.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Oldwood

  • Posts: 287
  • Alberta, Canada
Re: I-socket screw up my ts75?
« Reply #1 on: October 05, 2017, 02:56 PM »
I use this switch because it allows me to power the saw and the vac off of separate circuits.
http://www.leevalley.com/en/wood/page.aspx?p=63013&cat=1,42401,72660

Using the saw and the vac on one circuit can overload the breaker.
Real knowledge is to know the extent of one's ignorance.
Confucius

Offline mikewaters

  • Posts: 15
Re: I-socket screw up my ts75?
« Reply #2 on: October 05, 2017, 03:00 PM »
I use this switch because it allows me to power the saw and the vac off of separate circuits.
http://www.leevalley.com/en/wood/page.aspx?p=63013&cat=1,42401,72660

Using the saw and the vac on one circuit can overload the breaker.

they are already plugged into the same receptacle, but i don't know if the switch contraption and electronics will mess with my ts75 is all.