« previous next »
Pages: [1]   Go Down

Author Topic: Kapex. How to cut long crown moulding?  (Read 1881 times)

0 Members and 1 Guest are viewing this topic.

Offline clearcut

  • Posts: 4
Kapex. How to cut long crown moulding?
« on: November 15, 2017, 10:38 PM »
Hi to all!
New on the site.  I just purchased a kapex. the whole system with 2 crown stops and all other accessories.  I bought it specifically to make precise cuts on crown mouldings.  Was shocked when I noticed that I can not use the crown stop together with the ug extensions. All the other other saws and stand I owned before I was able to cut long pieces of crown moulding on and I thought this will be better than my other machine to do the job.  Am I missing something or did they actually miss the mark on engineering?  It must be just my inexperience on the machine!  I own most of the other major tools festool offers and I was happy with everything else....
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Bohdan

  • Posts: 877
Re: Kapex. How to cut long crown moulding?
« Reply #1 on: November 15, 2017, 11:01 PM »
Reverse the UG rails (R to L and L to R) so that they act as crown stops and length stops as well.
Logged

Offline Corwin

  • Posts: 2611
Re: Kapex. How to cut long crown moulding?
« Reply #2 on: November 15, 2017, 11:07 PM »
Welcome to the forum!

You might check out these aftermarket replacements for the Crown Stops that work with the UG Extensions:

Multiblades Kapex KA-UG Connection Brackets
Logged
Looks like your rabbit joint is a hare off! ;)

Offline CrpntrFreak

  • Posts: 19
Re: Kapex. How to cut long crown moulding?
« Reply #3 on: November 15, 2017, 11:47 PM »
Quote from: Bohdan on November 15, 2017, 11:01 PM
Reverse the UG rails (R to L and L to R) so that they act as crown stops and length stops as well.

Holy crap...... that is so simple. Wish I would have thought of that! Lol. Thanks!!
Logged

Offline Naildrivingman

  • Posts: 483
Re: Kapex. How to cut long crown moulding?
« Reply #4 on: November 16, 2017, 06:01 AM »
Quote from: CrpntrFreak on November 15, 2017, 11:47 PM
Quote from: Bohdan on November 15, 2017, 11:01 PM
Reverse the UG rails (R to L and L to R) so that they act as crown stops and length stops as well.

Holy crap...... that is so simple. Wish I would have thought of that! Lol. Thanks!!
Yup!  I floated a question about the value of crown stops and I’m not sure if @Bohdan was who replied, but I got the same response and it works GREAT!  It is a little finicky to set up, but once done it works very well.  Totally agree.

You may need an additional outfeed support, but that is a pretty simple resolution.
« Last Edit: November 16, 2017, 06:04 AM by Naildrivingman »
Logged
Dance with who brung ya...

Offline ear3

  • Posts: 3594
Re: Kapex. How to cut long crown moulding?
« Reply #5 on: November 18, 2017, 07:05 AM »
Another method I use is the one demonstrated by Gary Katz -- which is useful if you don't want to go through the trouble of switching around the UG extensions, and will give you support all the way through the cut:

Logged
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline clearcut

  • Posts: 4
Re: Kapex. How to cut long crown moulding?
« Reply #6 on: November 19, 2017, 10:45 AM »
Thanks a lot for your input guys!  I tried reversing the UG rails, made my cuts on all the long pieces I needed to cut, then I used my crown stops to make my short pieces.  Works fairly well until I find a better solution.  Only issue I can see if I need to alternate between long and short pieces frequently ...   Thanks again!
Logged

Offline rizzoa13

  • Posts: 582
Re: Kapex. How to cut long crown moulding?
« Reply #7 on: November 19, 2017, 07:19 PM »
Cutting on the flat and using a miter/bevel chart has given me way more accurate cuts than I was ever to get by cutting nested.
Logged

Offline Master Carpenter

  • Posts: 90
Re: Kapex. How to cut long crown moulding?
« Reply #8 on: November 19, 2017, 08:56 PM »
Quote from: rizzoa13 on November 19, 2017, 07:19 PM
Cutting on the flat and using a miter/bevel chart has given me way more accurate cuts than I was ever to get by cutting nested.

Cutting on the flat and using the Bosch digital angle finder with built in crown calculator has given me more accurate cuts faster than cutting nested.
Logged
Ts 55, Ts 75, of 1010, lr 32, mft, mfs 700, RO 150 x2 + paper asort, RO 90 + paper asort, pro 5, df 500 + dom asort, hl 850 e, ti 15, t18, cxs, centrotec set, ct48, ct sys, vac sys, 32;55x2;118 tracks, a stack of sys and an og festool first aid kit. Kapex, planex, carvex, conturo.
Pages: [1]   Go Up
« previous next »