Author Topic: Lr32 guide rail question  (Read 973 times)

0 Members and 1 Guest are viewing this topic.

Offline earcaesar1

  • Posts: 18
Lr32 guide rail question
« on: September 29, 2018, 05:02 PM »
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Sent from my SAMSUNG-SM-G890A using Tapatalk


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 11533
Re: Lr32 guide rail question
« Reply #1 on: September 29, 2018, 05:10 PM »
I think that this might help:



Peter

Offline earcaesar1

  • Posts: 18
Re: Lr32 guide rail question
« Reply #2 on: September 29, 2018, 05:14 PM »
I think that this might help:



Peter
I'll take a look at this later

Thanks for the link

Sent from my SAMSUNG-SM-G890A using Tapatalk


Offline jobsworth

  • Posts: 5242
  • Does Anyone Know What Time It Is?
Re: Lr32 guide rail question
« Reply #3 on: September 29, 2018, 10:32 PM »
simple use one of the end stops. If you look closely they will have a = on thec16-32 side.
just install the end stop in betweent the 2 rails use the thumb screws to tighten them to the rail and make sure the = is in the gap between the 2 rails visible from the top
« Last Edit: September 29, 2018, 10:46 PM by jobsworth »

Offline Douglas Urner

  • Posts: 53
Re: Lr32 guide rail question
« Reply #4 on: October 09, 2018, 11:18 PM »
simple use one of the end stops. If you look closely they will have a = on thec16-32 side.
just install the end stop in betweent the 2 rails use the thumb screws to tighten them to the rail and make sure the = is in the gap between the 2 rails visible from the top

Nice! Why don't the instructions (instructions?) tell you this?