Author Topic: Mounting a kapex to a vacuum  (Read 406 times)

0 Members and 1 Guest are viewing this topic.

Offline Greenhart

  • Posts: 1
Mounting a kapex to a vacuum
« on: October 17, 2018, 06:11 PM »
Hi, new member here and Festool junkie for about the last 2 years. It started innocently enough with just a track saw, then a sander and a natural slip down to a kapex then a vacuum.... Seriously though, the other day I started thinking about a mounting plate to attach to my vacuum like a Systainer while moving it to set up at a job. Googled it and haven't found anything? I can't be the first person to think this would be a practical little project?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline kevinculle

  • Posts: 231
Re: Mounting a kapex to a vacuum
« Reply #1 on: October 17, 2018, 06:57 PM »
If your Kapex is frequently moved you really shouldconsider the UG cart and extensions.  Moving usually involves lifting in & out of vehiocles, going up and down steps, etc. and the vacuum/Kapex combo would be heavier and more awkward.