Author Topic: Plug it cord repair  (Read 2844 times)

0 Members and 1 Guest are viewing this topic.

Offline Lettusbee

  • Posts: 51
Plug it cord repair
« on: January 28, 2018, 06:48 PM »
How do you remove the plastic plug it piece and reconnect the cord a little further down so that the insulation can do it's job?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 5675
Re: Plug it cord repair
« Reply #1 on: January 29, 2018, 02:45 AM »
You can't, it's all molded together. Once a plug is broken you have to buy a whole new cord. One of the reasons these things suck so much. Good money maker for Festool. [thumbs up]

In the past they offered a new plug you could fit yourself, but they stopped doing that. But the new plug was only 25% cheaper than an entire new cord anyway.

Offline Oldwood

  • Posts: 328
  • Alberta, Canada
Re: Plug it cord repair
« Reply #2 on: January 29, 2018, 03:47 PM »
Make sure you get the heavy cord if you have tools that use them or plan to get them. Then you have a cord that will work with ALL the tools.

Gerry
Real knowledge is to know the extent of one's ignorance.
Confucius

Offline lwoirhaye

  • Posts: 148
Re: Plug it cord repair
« Reply #3 on: January 30, 2018, 10:36 AM »
I think I saw a post in here by a guy who said he could repair them.  He wanted to exchange two bad ones for one good one, but maybe he'll take a fee.

Offline Lettusbee

  • Posts: 51
Re: Plug it cord repair
« Reply #4 on: January 30, 2018, 10:38 AM »
Since the plug itself still works fine, I was hoping it could be removed, slide the strain relief  down over the insulation and reconnect.  This cord is probably ten years old if that makes a difference.  Since green on festool is supposed to indicate  that it has a purpose, thought I might get lucky. 

Thanks y'all

Sent from my SM-G950U using Tapatalk


Offline Mario Turcot

  • Posts: 429
Re: Plug it cord repair
« Reply #5 on: January 30, 2018, 11:51 AM »
I suggest to split a larger size(bigger than the cable) shrink tube and heat it over the connector. It will make it stiffer but at least will protect it a bit more.
Mario

Offline ChuckM

  • Posts: 515
Re: Plug it cord repair
« Reply #6 on: January 30, 2018, 02:14 PM »
Good fix idea. I would even go one step further and repeat that with one or even two more still larger tubes.

Offline Lettusbee

  • Posts: 51
Re: Plug it cord repair
« Reply #7 on: January 30, 2018, 06:45 PM »
Double Yep on the Shrink Tube. 

Thanks

Offline Bob Wolfe

  • Posts: 82
Re: Plug it cord repair
« Reply #8 on: January 30, 2018, 10:07 PM »
Ever heard of electrical tape???

Offline Lettusbee

  • Posts: 51
Re: Plug it cord repair
« Reply #9 on: January 30, 2018, 10:17 PM »
Sure, but I run a classy operation [big grin]

Offline Bob Wolfe

  • Posts: 82
Re: Plug it cord repair
« Reply #10 on: January 31, 2018, 12:01 AM »
Then use red tape.

Offline NL-mikkla

  • Posts: 256
  • www.m144h.com
Re: Plug it cord repair
« Reply #11 on: January 31, 2018, 01:00 AM »

Offline Kiwitussock

  • Posts: 3
Re: Plug it cord repair
« Reply #12 on: June 30, 2018, 06:36 PM »
Is this the same for the Protool Drill cord?
It looks a little different than the cable in the photograph.
Cheers

Offline Alex

  • Posts: 5675
Re: Plug it cord repair
« Reply #13 on: July 01, 2018, 01:37 AM »
Is this the same for the Protool Drill cord?
It looks a little different than the cable in the photograph.
Cheers

In what way does your cord look different? All Plug-It cords, Protool or Festool, are made in the same way, all molded together and not user serviceable.