Author Topic: Using Domino on small parts?  (Read 1357 times)

0 Members and 1 Guest are viewing this topic.

Offline cygnus a

  • Posts: 4
Using Domino on small parts?
« on: April 29, 2018, 08:05 PM »
Anyone have a method of clamping smaller parts to a domino? I have a 2x2x6 inch piece I need to put dominos into and am having trouble figuring this out.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Birdhunter

  • Posts: 2242
  • Woodworker, Sportsman, Retired
Re: Using Domino on small parts?
« Reply #1 on: April 29, 2018, 08:26 PM »
I use double sided tape to affix the small parts to a larger part. I do this for Domino, tablesaw, bandsaw, etc.
Birdhunter

Offline ChuckM

  • Posts: 524
Re: Using Domino on small parts?
« Reply #2 on: April 29, 2018, 09:02 PM »
If you have not cut your stock yet, oversize it (in length and/or width) first and cut the mortises. Then trim the work to size.

If your stock is in its final dimension, cradle it and double-face tape the piece.

Cradling = Surround the work around with sheet goods of the same thickness. You can work on the end or surface with this approach.



« Last Edit: April 29, 2018, 09:04 PM by ChuckM »

Offline ear3

  • Posts: 3587
Re: Using Domino on small parts?
« Reply #3 on: April 30, 2018, 01:36 PM »
It also helps if you are doing multiple pieces of the same size.  That way you can line them up next to one another for more support for the fence.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3