Author Topic: Ct 48 cart  (Read 1293 times)

0 Members and 1 Guest are viewing this topic.

Offline dboardman

  • Posts: 7
Ct 48 cart
« on: August 07, 2017, 12:56 PM »
So this is a work in progress. My goal was to have a rolling go to cart for all things I use that are not stationary. The inside as of now holds just my ct 48, eventually I will be adding a small 2 gallon air compressor as well. The suction hose is ran up through the top through a 3" pvc pipe an out.  The top is on a lazy Susan spinner so the hose can rotate 360 degrees.  Both sides are on piano hinges and can be opened all the way out to get to the Ct for maintenance.

The plan is to add some bricks inside to help keep it from becoming tippy, it stands at about 6 1/2 tall. I left the bottom front, middle back, and half the top open for air flow for the machine inside. 

Don't mind the mess in the background, I moved into this building a couple months back and there is about 100 unfinished projects. 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Fury5

  • Posts: 25
Re: Ct 48 cart
« Reply #1 on: August 07, 2017, 08:50 PM »
Very creative.  I may have to copy it!