Author Topic: Domino Drying Rack  (Read 2463 times)

0 Members and 1 Guest are viewing this topic.

Offline Gjarman12

  • Posts: 87
Domino Drying Rack
« on: July 15, 2017, 08:24 AM »
I prefer to apply finish before gluing, but sometimes find small pieces hard, especially with those pyramid things.
I sometimes glue the end grain domino in before finishing too. I find it a little less stressful come glueup time.

I haven't seen this before, but I'm sure lots of others use this.

These dominos are not spaced at 32mm. Haha. I'll likely be making a 5mm version, this is a 6mm.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online Cheese

  • Posts: 3464
Re: Domino Drying Rack
« Reply #1 on: July 15, 2017, 08:46 AM »
I like it... [thumbs up]  I may have to use this method myself. [smile]

Online Birdhunter

  • Posts: 1947
  • Woodworker, Sportsman, Retired
Re: Domino Drying Rack
« Reply #2 on: July 15, 2017, 08:50 AM »
Neat idea! What's the wood?
Birdhunter

Offline tjbnwi

  • Posts: 5159
  • Cedar Tucky Indiana
Re: Domino Drying Rack
« Reply #3 on: July 15, 2017, 08:57 AM »
I do the same with shelves and any other items when the mortices can be utilized or hidden during assembly.

Allows for vertical or horizontal drying/storage. 

Tom

Online Cheese

  • Posts: 3464
Re: Domino Drying Rack
« Reply #4 on: July 15, 2017, 09:05 AM »

Offline ear3

  • Posts: 3292
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • DX 93 • RS 2 • HL 850 • Vecturo OS 400 • CT 26 w/Long-Life Bag • CT Sys w/Long-Life Bag • MFT/3

Offline waho6o9

  • Posts: 1284
    • Garage Door Handyman.com
Re: Domino Drying Rack
« Reply #6 on: July 15, 2017, 10:29 AM »
Good stuff

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 861
  • I make sculptural furniture.
    • Flair Woodworks
Re: Domino Drying Rack
« Reply #7 on: July 15, 2017, 11:17 AM »
I usually just balance the parts on end and hope there isn't a breeze.😉
Chris Wong, http://FlairWoodworks.com

The thoughts and ideas expressed here are my own and do not necessarily represent those of http://UltimateTools.ca.  But Dan does say "hello".

Offline Gjarman12

  • Posts: 87
Re: Domino Drying Rack
« Reply #8 on: July 15, 2017, 11:19 AM »
It's cedar, with Osmo 410 on.
The table top is cypress.

Offline Gjarman12

  • Posts: 87
Re: Domino Drying Rack
« Reply #9 on: July 15, 2017, 11:27 AM »
I do the same with shelves and any other items when the mortices can be utilized or hidden during assembly.

Allows for vertical or horizontal drying/storage. 

Tom

That is sweet, maybe one day I'll need to be that efficient.

Offline GarryM

  • Posts: 5
Re: Domino Drying Rack
« Reply #10 on: July 27, 2017, 08:05 AM »
Great idea, thanks for sharing

Offline Gjarman12

  • Posts: 87
Re: Domino Drying Rack
« Reply #11 on: July 27, 2017, 08:12 AM »
Thanks.
Here are the tables. Cypress and cedar, built to match a recently made deck.
« Last Edit: July 27, 2017, 08:14 AM by Gjarman12 »