Author Topic: Drill Perfect Holes With The New UJK Technology Drill Guide  (Read 6702 times)

0 Members and 1 Guest are viewing this topic.

Offline Bob D.

  • Posts: 633
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #30 on: September 19, 2017, 09:48 PM »
The option of a fence would be a nice addition.
-----
It's a table saw, do you know where your fingers are?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tazprime38

  • Posts: 238
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #31 on: September 20, 2017, 05:19 AM »
Maybe @Peter Parfitt can suggest to UKJ Axminster about incorporating a fence for the drill jig?

Offline Bob D.

  • Posts: 633
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #32 on: September 20, 2017, 04:39 PM »
Maybe @Peter Parfitt can suggest to UKJ Axminster about incorporating a fence for the drill jig?

Possibly. Peter has been quiet of late. I bet he is head first into another of his excellent video productions, maybe on this very drill guide.
-----
It's a table saw, do you know where your fingers are?

Offline Bob D.

  • Posts: 633
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #33 on: September 23, 2017, 06:41 AM »
Looking online for more information about the UJK Drill Guide I came across this.

A drill guide with a vacuum base which could fit some special needs. The price is
a little steep I think but hey if you need it you need it.

-----
It's a table saw, do you know where your fingers are?

Offline Cheese

  • Posts: 3474
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #34 on: September 23, 2017, 08:12 AM »

A drill guide with a vacuum base which could fit some special needs. The price is
a little steep I think but hey if you need it you need it.


Interesting...especially that they show it adhered to diamond plate and a textured ceiling.  [eek]  $278

Offline ben_r_

  • Posts: 778
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #35 on: September 23, 2017, 02:31 PM »
Oh, love the idea of having a vacuum base on a drill guide! Very cool!
If at first you don't succeed, redefine success!

Offline Bob D.

  • Posts: 633
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #36 on: September 23, 2017, 04:27 PM »
Oh, love the idea of having a vacuum base on a drill guide! Very cool!

Yeah, but is it $275 worth of cool ???
-----
It's a table saw, do you know where your fingers are?

Offline TSO Products

  • Retailer
  • *
  • Posts: 492
    • TSO Products
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #37 on: September 23, 2017, 04:43 PM »
I have a similar style guide, which I've used a bunch. It has tons of slop, and also also vibrates quite badly while in use. I would really love a press, but I just don't have the room. I suppose a guide is better than nothing, but mine is definitely not great.

This one looks nice and solid. The clamping/attachment options are also interesting. That's something I've struggled with as well, particularly when using at angles. And, a centrotec-compatible shank really adds to the convenience. Would prefer a ratcheting chuck, though.

I'd love to give it a shot - any one know if it is available in NA?

TSO Products will have it in stock by mid October - first-come-first-served and with money back satisfaction guarantee  [smile]
email us if you want to be notified: info@tsoproducts.com

Hans and Eric
TSOproducts.com

Home of the GRS-16 and GRS-16 PE Guide Rail Squares -  the MTR-18 Triangle and Work Holding solutions

Offline ben_r_

  • Posts: 778
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #38 on: September 23, 2017, 05:28 PM »
Oh, love the idea of having a vacuum base on a drill guide! Very cool!

Yeah, but is it $275 worth of cool ???
Products with vacuum bases like that are always expensive. A 5"x5" or so vacuum plate from say Lee Valley or eBay is going to run about $60-70 on it's own. I guess with all the metal and custom milled parts yea $200-300 is to be expected. Not worth it for me, but its not like theres that many options around.
If at first you don't succeed, redefine success!

Offline Bob D.

  • Posts: 633
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #39 on: September 23, 2017, 06:51 PM »
I can think of a number of times over the years I could have used
one of these on jobs where most stuff is stainless steel and a mag
drill will not work. We've come up with ways around it but this would
be a better and possibly faster solution.

Couldn't use the venturi vacuum though, would have to use a vacuum
pump for the jobs I am thinking of because they couldn't tolerate the
exhaust air stirring up particles and creating airborne contamination in
clean areas or inside control cabinets.
-----
It's a table saw, do you know where your fingers are?

Offline Cheese

  • Posts: 3474
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #40 on: September 24, 2017, 09:16 AM »
...where most stuff is stainless steel and a mag drill will not work.

...because they couldn't tolerate the exhaust air stirring up particles and creating airborne contamination in
clean areas or inside control cabinets.

Wafer fab cleanroom?

Offline Bob D.

  • Posts: 633
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #41 on: September 24, 2017, 09:40 AM »
No. Nuclear facility. They like to keep their radioactive particles
right where they are. When they get stirred up its a problem.
-----
It's a table saw, do you know where your fingers are?

Offline adcolor

  • Posts: 67
    • MIkey's Millworks and More
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #42 on: September 27, 2017, 10:50 AM »
I suspect an inquiry and test on their part would find it works both ways. Easy enough to put a vacuum pump on it.
Pressure is pressure -- just matters what side the needle moves to.

Festool makes that plastic drill vacuum fixture.  Works great.  Not a guide, but if you already center punched the reference hole, it would be what you need.

Offline Cheese

  • Posts: 3474
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #43 on: September 27, 2017, 10:57 AM »
They like to keep their radioactive particles
right where they are. When they get stirred up its a problem.

 [big grin] [big grin] Ya that's an understatement...

Offline Michael Kellough

  • Posts: 2911
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #44 on: September 27, 2017, 12:58 PM »
I suspect an inquiry and test on their part would find it works both ways. Easy enough to put a vacuum pump on it.
Pressure is pressure -- just matters what side the needle moves to.

Festool makes that plastic drill vacuum fixture.  Works great.  Not a guide, but if you already center punched the reference hole, it would be what you need.

Actually they don't make it just re badge it. Notice the price is about half what it would be if Festool designed and manufactured the thing (compoare to similar sized vac fittings)

Offline rst

  • Posts: 1537
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #45 on: September 27, 2017, 05:33 PM »
Hear ya Mr. D...that stirring up of particles is what got Russia and Japan in trouble.   [blink]

Offline AxminsterTools

  • Posts: 6
    • Axminster Tools & Machinery
Re: Drill Perfect Holes With The New UJK Technology Drill Guide
« Reply #46 on: October 05, 2017, 04:04 AM »
Hi Everyone,

Due to unprecedented demand the UJK Drill Guide is temporarily out of stock and has been removed from the website. We are working hard to manufacture new drill guides and as soon as the new stock is ready the guides will be relisted.

Please note on some of the drill guides there has been a small durability issue with the shaft. This has been fixed with the latest production. All customers who have bought a drill guide will be sent a replacement part even if they have not experienced an issue.

If you have any questions however please let us know.

Thanks

Axminster
Axminster Tools & Machinery

03332 406406
www.axminster.co.uk